Mark, On my GTS I used 73 and up Arms and spindles. I bought my own calipers from my supplier. My car has the sway bar, so I knew I would have to mount them rearward. My bleeders ended up, same as yours. What I did, was leave the caliper off the mount, installed a thin block of wood where the rotor would go. Then I merely held the caliper with the bleed screws up to bleed them. Re install the caliper on the rotor and Viola... @MomsDusterAnother good guess and not too far off from the main issue. Let me pose this question...Shouldn't the bleeder screws be at the top?
Last edited:
Thats exactly what i believe they did! Lets assume I was able to get them bled, (highly unlikely) the first time i would have hit the brakes they would have broken the retainers at the bottom of the caliper and really had an issue!
















