B.C. members...chime in!!!

-

65Val

Average Length Member
Joined
Oct 14, 2005
Messages
5,354
Reaction score
1,310
Location
Victoria, BC, Canada, EH!
Hey all!. I know my nick says "65Val" ,but I also have a '67 Dart GT 'vert which I just bought. Its a 273,auto on the column,with buckets.I've attached a pic below.....

67Dart1.jpg
 
well i just registered today. I don't have any cars to show you guys lol but anyway Im in Prince George
 
Victoria BC here..

67 valiant
/6 auto on column
8 1/4 posi
bucket seats
16inch rims (225/60r16)
front disk brakes conversion
and a lovely spray can paint job(flat black)

more hopsto come.. maybe a 340... Slleeeeeper. shhh!
 
Drop a 360 in that baby and hang on Cerwin. A LOT more power and fun than the 318, and a LOT cheaper than a 340. Also, with the longer stroke of the 360 you get a little better low end from the 360 where you need to wind the RPM higher on the 340. :)
 
Howdy all, from Surrey BC here. I got a 1974 Dart Sport and I'm in the process of rebuilding a 440 to slap in. I'm new to the forum and I'm 18 years old so any help would be greatly appriciated :thumbup:




(sorry no pics yet, can't figure out how to make them smaller to fit)
 
Cool, bugs fine. Are they all yours :thumbup: The pics also look like your in OK country...without snow.
 
Yup they are all old pictures. The bug was taken in Calgary just before we brought it home. The cuda was taken at a look out above Castlegar a few years ago and the dart picture is from our home we sold last summer. Hope to start restification on the dart this year..been so flippin busy but it should get under way this spring.
 
Sparky said:
Yup they are all old pictures. The bug was taken in Calgary just before we brought it home. The cuda was taken at a look out above Castlegar a few years ago and the dart picture is from our home we sold last summer. Hope to start restification on the dart this year..been so flippin busy but it should get under way this spring.

Sparky, she looks like she's ready now...just resting her legs :lol:
 
Phil here from Maple Ridge.

1973 dart sport.
1972 demon
1970 duster

I have lots of pics of them on other posts, I won't clutter you guys.

Any mopar meets in the lower mainland this summer????

PS anyone have a big block 10.5 inch clutch fork

Phil

if you need parts, just ask.
If you know where I can get parts locally Please tell.
 
opps, had to slide the bug in!

Nothing wrong with a nice Vee-Dub, looks good. Hi from another Maple Ridger!! Phil I saw a pic of your girls '65 cuda you had posted, we'll have to check it out some time.

no crappy fog lights.jpg
 
Nothing wrong with a nice Vee-Dub, looks good. Hi from another Maple Ridger!! Phil I saw a pic of your girls '65 cuda you had posted, we'll have to check it out some time.

For sure, You know a good place to get parts for those 65's. She will need some lower 1/4's in the near future.

Now I know what to look for in Maple Ridge. Nice car. If I finish mine, We'll have to park our yellow bannana's together sometime;)
 
For sure, You know a good place to get parts for those 65's. She will need some lower 1/4's in the near future.

Check out Layson's Restorations in Washington State. They have lower quarter skin patch panels and the wheel lip patchs as well for '65 Barracuda's/US Valiants.
 
Hey guys nice looking cars, man I got to get some pictures of my car to post. I'm up on the Northend of Vancouver Island in Port McNeill.
 
-
Back
Top