WTB: Rocky Mountain Dash

-
Status
Not open for further replies.
Riddler

Riddler

Project EH-Body
Joined
Sep 13, 2009
Messages
2,809
Reaction score
668
Location
Windsor, ON, Canada
Rating - 100%
22   0   0
Contact seller
Mostly looking for the gauges portion of the Rocky Mountain Dash but I'm willing to buy a complete as well.

My plan is to keep bumping this post every week until I find one. I've heard of many fly by night guys coming on FABO promising to make a dash and I'm tired of reading it. Make a dash and show us or just shut up!

Riddler
 
Fastlane doesn't have any stock, try Redline Gauge Works.
 
cannot post i can post my pictures on all the other sites they make put not this site send e mail i will send pictures of my dash that redline did for me
 
This dash would need to be able to fit my Duster. I can do some fab work as well if it don't fit 100%. However keep in mind I don't want a stock cluster, I'm not interested in a plastic dash cluster with holes cut into it for gauges.

I'm looking specifically for the RMD dash look. These are made of metal and have the gauges sunken into the dash.

Riddler
 
Is this what you are looking for. I found this guy out of New Zealand and am asking him if he will make one for a Duster. So I will let you know what I find out. By the way this one is made out of aluminum and is for an "E" body so he is a mopar guy just need to get him to focus on us Duster Guys.
 

Attachments

  • GaugeCluster01.jpg
    110.3 KB · Views: 861
Riddler said:
This dash would need to be able to fit my Duster. I can do some fab work as well if it don't fit 100%. However keep in mind I don't want a stock cluster, I'm not interested in a plastic dash cluster with holes cut into it for gauges.

I'm looking specifically for the RMD dash look. These are made of metal and have the gauges sunken into the dash.

Riddler
Click to expand...

This is what you're talking about right ??

IMG_0208.jpg
 
varlo said:
I wish they were still making these and I had the coin for one haha
Click to expand...

I know what you mean,there's over $1k sitting right there !!And no,the wife didn't know !!! Or it probably wouldn't be !!Or I wouldn't be !! :toothy3:
 
6pakattack, yes that is what I'm looking for. T-granger that one would work if I could move the gauges to different locations.

Bump still looking.

Riddler
 
Riddle you seem some what talented make a template and have one made i think thats the only way you are going to get what you want
 
72duster72 said:
Riddle you seem some what talented make a template and have one made i think thats the only way you are going to get what you want
Click to expand...


I also agree and I plan on sending some pictures and idea's to a local friend who works in aluminum quite a bit.

I'm just hoping I'll be able to find one to save me some time and money.

Riddler
 
bet you will make one before you find one for sale. Everyone will not let them go.
 
Riddler let me know if you decide to make one, or you find someone who will only sell you two of them, Hey it might happen.

I have not bought my I/P yet so I am still looking and have yet to receive an answer from the guy in the post above.

I like that look as well. So I will help this bump until you find something, just don't forget me if they have two..

I can hope, Right?
 
Keep in mind that making one is a time consuming job, it would be more cost effective to get a second job or work overtime to pay for one than all the man hours it takes to build your own.

Plus all that grinding and cutting really makes a mess in the garage, still got dust in places that I don't want to take the time to clean. If you decide to make your own, let me know if you need help.
 
I started working on the RMD dash I've had for over a year now...Little bastard was expensive at $475 bucks off E-bay. Plus another $800 or so for my auto meter gauges. I have to finish tig welding the gauge tunnels on the backside of the unit because they send them out only tac welded. Also, on the front you can see how the auto meter gauges are a tight fit where the gauge goes in the recess, i gotta finish sanding where the top piece overlaps the insert. Still not sure what my 7th gauge should be...

2gxf9r4.jpg


14bkr9w.jpg
 
Status
Not open for further replies.
-

Back
Top