parting out the whole yard except my project cars

[waggin]

I wish!!!!

Do you have an e body shaker setup?

 

[pacuda59]

Any headrests for a 69 Barracuda?

 

[waggin]

actually I do have the 3:91 with power lok (clutch type) (sure grip) is cone type.......(Posi) is a chevy or ford part I have none of that here....not one piece Lol the 3:91's pm me a reasonable offer as I really wasn't gonna sell it ...you might could persuade me $$$$$$$

man you have a lot of **** there ; lol anyway iam looking for the vent tube that goes in the rearend housing screws in. also thought you might have a good 8 3/4 posi center chunk with some 391 s thanks

 

[waggin]

no sir

Any headrests for a 69 Barracuda?

 

[waggin]

no I'm hoarding them....just kidding I wish I had them

Any 15x7 and 15x8 4x5(SBP)steelies??Let me know with price.Thanks

 

[YY1]

Wow, you're right up the road from me...OK, so it's 60+ miles one way...

How much B body stuff you got?

What's that blue car with a/c?

You open to "local" browsers?

My brother and I love road trips to see collections, especially when we know they're for sale!

 

[waggin]

not much b body stuff, one 8 3/4 drum to drum, apile of trim and some misc. the blue car with a/c 71 dart, yea if my dawg don't eat you i guess you can browse....bring cash and a bigg truck and really big trailer
pm me your number and we'll git together.

Wow, you're right up the road from me...OK, so it's 60+ miles one way...

How much B body stuff you got?

What's that blue car with a/c?

You open to "local" browsers?

My brother and I love road trips to see collections, especially when we know they're for sale!

 

[Mopar44134]

educate me how to tell which schroud is which, theres about 15 of em in my pile

the ending part number will be 345...22" wide, bolt holes will be 13.25 high...i think.

made a mistake, 325.

 

[waggin]

a lot of these I found no part number but I'll see if i can find my glasses so I can find my glasses and look better, the measurements may be helpful thank's!!!!!

the ending part number will be 345...22" wide, bolt holes will be 13.25 high...i think.

 

[70DartMike]

Hey Waggs, I need a big block bellhousing to mate to an NP435 in a 65 Dodge truck.

Anything?

 

[SpeedracerX]

any a-body buckets?

 

[crazy 340]

pm send

 

[Nappa82]

This is like waving a side of raw beef at a starved wolf. And I'm all in it

 

[drive48]

you need to rent a semi and head to carlilse in july!!!!!!
whats the gold car with buckets pictured???
joe

 

[72ScampTramp]

Wow Curtis I knew you had parts but damn!

Got a know working cluster that will work in the Scamp?
Pre 72 rear side maker lights for Dart? The ones that sort of sink into the quarter panel.
Full set of locks with key.
Window sweeps

 

[srixon4406]

Pm sent

 

[Bob Creighton]

Do you have 3.23 gears for 8 3/4 with 489 cast #?:blob:

 

[waggin]

that would be boring and i cant remember what I dont have>>>>>

Might be a shorter post if you just listed what you don't have

 

[waggin]

i will check ratios and casting #'s a.s.a.p.

Do you have 3.23 gears for 8 3/4 with 489 cast #?:blob:

 

[waggin]

no sir, no big block bell's

Hey Waggs, I need a big block bellhousing to mate to an NP435 in a 65 Dodge truck.

Anything?

 

[waggin]

I have two sets of buckets that are the later model high backs but not sure exactly what they are and will try to get pic's up a.s.a.p.

any a-body buckets?

 

[SpeedracerX]

I have two sets of buckets that are the later model high backs but not sure exactly what they are and will try to get pic's up a.s.a.p.

Cool. Thanks

 

[MoparsB4me]

PM sent

 

[bkbond12]

How much for the charcoal grill in the first pic of post #6? Hahaha. Figured give you a bump for a plethora of amazing parts.

 

[thomasjkt]

I need a set of cheap exhaust manifolds for a Demon with a 360 in it, car is non pwr steering and a 4spd.