'69 Dodge Dart GTS

-

Kegan B

Well-Known Member
Joined
May 17, 2011
Messages
2,994
Reaction score
1,073
Location
IN
Street/Strip Car

340 .30 over, TRW pistons, stock crank, windage tray, Victor 340 intake, accel dizzy, 850 holley, M/T valve covers, hooker headers
 

Attachments

  • GTS1.jpg
    146.6 KB · Views: 2,672
  • GTS10.jpg
    57.8 KB · Views: 2,475
  • GTS9.jpg
    108.8 KB · Views: 2,539
  • GTS8.jpg
    99.7 KB · Views: 2,507
  • GTS7.jpg
    128.1 KB · Views: 2,488
  • GTS6.jpg
    132.8 KB · Views: 2,588
  • GTS5.jpg
    108 KB · Views: 2,476
  • GTS4.jpg
    135.9 KB · Views: 2,515
  • GTS3.jpg
    130.9 KB · Views: 2,573
  • GTS2.jpg
    151.1 KB · Views: 2,558
It was bought in the early 70's as a shell. It was a original 340 4 speed car. It had a 70's paint job on it, it was pearl white and pearl green. When it was finished, it had a .30 318 with a 727 reverse valve body with a 8 3/4 rear, it was repainted maroon with silver down the sides. The car sat for a couple of years and has rust in the usual places.
 

Attachments

  • GTS18.jpg
    69.6 KB · Views: 2,427
  • GTS19.jpg
    59.5 KB · Views: 2,441
  • GTS20.jpg
    70.8 KB · Views: 2,450
  • GTS24.jpg
    45.6 KB · Views: 2,424
  • GTS25.jpg
    67.1 KB · Views: 2,458
more pics
 

Attachments

  • GTS22.jpg
    76.1 KB · Views: 2,401
  • GTS17.jpg
    75.9 KB · Views: 2,371
  • GTS16.jpg
    104.3 KB · Views: 2,403
  • GTS15.jpg
    74 KB · Views: 2,403
  • GTS14.jpg
    89.1 KB · Views: 2,397
  • GTS13.jpg
    71.1 KB · Views: 2,447
  • GTS12.jpg
    87 KB · Views: 2,409
  • GTS11.jpg
    103.6 KB · Views: 2,446
  • GTS23.jpg
    76.4 KB · Views: 2,355
Not yet a member is sending me the ones for my inner fenders then i'm making the other 3.
 
Very good. That Dart will really be nice when you are done with it.
 
Almost ready to patch the inner fenders and primer them
 
Getting ready to go finish removing the 3 gallon fuel cell and brackets and get ready to put the new 12 gallon one in.
 
Found the fendertag today! Its a F8 car, black interior, black stripe.
 
V8X=Transverse Black Stripe
J25=Variable Speed Wipers
M21=Roof Drip Rail Moldings
M25=Wide Sill Moldings
N85=Console Mounted Tachometer
R11= Solid State AM Radio (2 watts)
V1F=Full Vinyl Top (Green)
AO1=Dart Light Group
B41=Front Disk Brakes
C16=Console with Woodgrain panel
C55=Bucket Seats
G11=Tinted Glass (all)
G33=Left outside remote mirror
F8=Dark Green Met
P6X=Premium Black Vinyl Seats
X9=Black Interior Door Frames
A25=October 25, 1968 Build Date
105986=Order Number
E55=340 4bbl
D21=833 4 speed
LS23=Dodge Dart, Special, 2 Door Hardtop
P9B= 340 275HP 1-4BBL V8 1969 Dodge Main Hamtramck, MI, USA
 
I hope you restore it kegan, that will be a super nice car when you are finished.
 
I hope you restore it kegan, that will be a super nice car when you are finished.
Thanks Cliff ! I just need to remedy some metal and it will be stock found inner fenders, need trunk floor, wheel tubs and quarter patches later I'll cut out the roll cage and put factory seats in it will have factory paint not sure on roof yet.
 
Thanks Cliff ! I just need to remedy some metal and it will be stock found inner fenders, need trunk floor, wheel tubs and quarter patches later I'll cut out the roll cage and put factory seats in it will have factory paint not sure on roof yet.

You're lucky kegan. AMD has everything you need. I know it will be slow but don't give up on it.
 
I would "restore it" to the way it was in the picture when parked in front of that dealership in the dark red.
That car was badass in it's day.......and can be again.
Good Luck!!

George
 
Started rebuilding the carb, may have found an 833. Do I need a aluminum or steel bell housing ?
 
-
Back
Top