Custom Dash for 1971 Demon

-

dale_brennon

Well-Known Member
Joined
Oct 22, 2009
Messages
376
Reaction score
23
Location
Louisville, KY
I am wanting to do some custom work to my dash in my Demon, and I had a question for anyone who has ever done one before. What angle is the inset part of the dash? I am wanting to cover the portion that the heater and radio went into, and insert my switch panel in that spot. To save myself some time I was hoping someone on here would know what angle to bend the metal at to get it to match the existing angle.
 
I am wanting to do some custom work to my dash in my Demon, and I had a question for anyone who has ever done one before. What angle is the inset part of the dash? I am wanting to cover the portion that the heater and radio went into, and insert my switch panel in that spot. To save myself some time I was hoping someone on here would know what angle to bend the metal at to get it to match the existing angle.

I am not sure on the angle, but you can get an angle finder at a local hardware store and you should be able to find it.
 
Could just bend a twist tie and lay it next to a protractor.
 
-
Back
Top