Where can I find an early Holley dominator accel pump arm?

[odcics2]

I have one, just need one more to match the pics. PM please thanks!

 

[1994redram]

There are a couple carb rebuild shops around me here in Oklahoma. They have 100's of carbs laying around. One of the shops has 55 gallon steel drums full of carbs for parts and cores. They have them organized by brand in the drums. Maybe theres something like that local to you?

 

[mopowers]

Have you tried calling Holley directly?

 

[odcics2]

Yes. No longer serviced... (for decades, in fact)
Here's an early Dominator showing the pump arm.
I'd buy an entire carb for parts, just to get it!
Thanks for the replies, guys.

 

[mopowers]

How different is it from the ones they use now? It looks pretty close to the one I have in front of me. Are they that different?

 

[odcics2]

How different is it from the ones they use now? It looks pretty close to the one I have in front of me. Are they that different?

Measure like I did and let me know the difference...
Possible I could take a few 'new' ones and cut-splice to look like the old 1969 piece.

 

[RustyRatRod]

This is the current available Dominator arm. I am not certain they are interchangeable, but they may be.

 

[odcics2]

I believe they would physically interchange, but I have vintage pics of my engine with the carb on it and am doing a correct period resto. Thanks.

 

[RustyRatRod]

I believe they would physically interchange, but I have vintage pics of my engine with the carb on it and am doing a correct period resto. Thanks.

<rolls eyes> Then bead blast the gold zinc off and throw it in a cup of piss for a while. It should rust up real good and look vintage. Good grief man, you're talkin about something no one would ever notice.

 

[odcics2]

Found one. A Ford GT-40 guy had it.