Shop Tours, let's see what you are working on.

-
6PKRTSE

6PKRTSE

Well-Known Member
Joined
Dec 2, 2010
Messages
278
Reaction score
456
Location
Motor City
FORBBODIES only has one. I didn't see one here. Let's see everyone's shop, pole barns, or garages. What are you working on in your shops? Last one to post wins.... Here are 2 of mine.

20161104_213725.jpg


rsz_20161104_213833.jpg


20161104_213747.jpg
 
Last edited:
Well-Known Member
The other 2 waiting there turn. I know, wow. The Road Runner is rough, but it was free.

20170821_133710-jpg.jpg


20170821_133641.jpg


20170311_163316.jpg


20170311_163254.jpg
 
aircraft salvage and recovery-
fillet the cargo bay off.
slice the fuselage, like a loaf of bread

sections become 10' wide for road permit, under 13'
reassembled > 40' long, 28' 5" wide , 12' 6" tall

2-2013-04200121_zps757a0eaa.jpg


2-2013-04200141_zps7791bd76.jpg


6-1-09 004.jpg
 
Don't know what made you think of that, but I like it!! Great ingenuity! Who sees an old salvage DC-10 and think "Hey! I could make a shop out of that!

:thumbsup::thumbsup::thumbsup:
 
Current project. Front end rebuild, block side freeze plugs, wire up the starter circuit like a Mopar (not a Chevy - NSS is not in the circuit), adjust shifter, install Pertronix, and make a little money. It even got a pair of NOS torsion bars...
DSC00176 25 percent.jpg
 
Me , on the hill in the sticks in Arkansas Pulled the fender off of Victoria, wow, bunch of bolts hold these on :)

000029.jpg
 
0325181402.jpg
This has been not finished for sometime, so I just started working on it again. And most people think it's a waist of chain but it was free and I got lots and free time too.
 
Me yesterday ! what was I doing ?? I painted these with POR 20 HIGH HEAT. great day around the grill outside by the shop :thumbsup:

000005.jpg


000002.jpg


000003.jpg


000004.jpg
 
Fred Scigliano said:
Been wanting to try por heat paint let me know how it works.
What's on the BBQ can I come over..
Click to expand...
I will, and the two coats went on like black water, second coat was a must, I heated them to over 180 degree . no way could I scratch it off , hard as it can be..
 
Fred Scigliano said:
Hey memike did the headder paint come in a spray can or what?
Click to expand...
It came in a quart can, I used a foam brush and put two coats on, I still have over a pint left over even after painting my 8 1/4 rear end with it, it goes a long way :thumbsup:
 
You must log in or register to reply here.
-

Back
Top