Shop Tours, let's see what you are working on.

-
It came in a quart can, I used a foam brush and put two coats on, I still have over a pint left over even after painting my 8 1/4 rear end with it, it goes a long way :thumbsup:
looks in the pictures that it flowed out real smooth. I'm hopping it really lasts a long time.
They make an engine paint also that I would like to try
 
20180316_213158.jpg
 
I only have a suburban 2 car garage. ....during bigger projects my truck has to stay outside. ....

20171212_182233.jpg

image000001.jpg


Jeff
 
Not !! .............. dang man !! you have this in your herd ? I did not know this :thumbsup:
good morning
 
Finally got out in the garage to work on the latest project a little. I had to reconfigure my outboard fogger around a little & lean the solenoids in a little to clear. I made all of my templates to start making my dual Dominator tunnel ram shaker conversion Time to start hacking on the parts now.

20180331_154427 (002).jpg


20180331_154502 (002).jpg
 
2/3of my junk is out of commission. I'm down to daily driving my 10 mpg truck.I've got about a 1 year backlog:

904 rebuild for my daily driver Scamp, then finish rebuilding the a/c before the hot weather hits.

Next is to get power to the garage.

Pull transmission out of the Duster.

Rebuild the motor in the truck.

4127E915-74C2-4D12-A3B6-AAA8DEA04AC4.jpeg


EF5E3D3E-AEC2-4974-A862-28417D9C0063.jpeg
 
This has been not finished for sometime, so I just started working on it again. And most people think it's a waist of chain but it was free and I got lots and free time too.

Not really a waste of chain, but the snake does have a pretty small waist LOL. Would look nice in the garage next to my 427SC Cobra, too.
 
-
Back
Top