Shop Tours, let's see what you are working on.

-
Not really a waste of chain, but the snake does have a pretty small waist LOL. Would look nice in the garage next to my 427SC Cobra, too.
yep that's what I'm working on then gonna spray some acid on it to make it rust.
You got some pics of your cobra? would love to see it.
 
20170925_132757.jpg
 
Replacing the passenger fender and heat cycling headers

000002.jpg


000004.jpg
 
Thanks to Eastwood & YouTube, it’s an art that hasn’t disappeared.
I don’t have anything against plastic filler, just THAT MUCH plastic filler.
Thanks for the compliment, when I started this project, I had never touched a welder, and no source for cheap steel.
After a bit of time with a file

E406C735-6F31-43B5-8896-CD12C0A9DEA9.jpeg
 
Last edited:
Thanks to Eastwood & YouTube, it’s an art that hasn’t disappeared.
I don’t have anything against plastic filler, just THAT MUCH plastic filler.
Thanks for the compliment, when I started this project, I had never touched a welder, and no source for cheap steel.
well looks to me like your doing good, been a body man my whole life and haven't done to much lead but your right on trying to not get to deep with the bondo.
 
Built a shed out back to hold all the junk that was filling up my shelves and got some decent shelves so I can get all the parts off the floor and finally get to work on the duster

IMG_20180421_172338.jpg
IMG_20180421_172348.jpg
IMG_20180421_172402.jpg
IMG_20180422_103920.jpg
 
garage.jpg


I really need to get back on my Porsche 356 restoration, as soon as

356.jpg


I pull the body off the frame on my 1922 Dodge Bros. touring car to repair rust-outs, as indicated

DB.jpg


as soon as I finish installing drywall, an electric heater and fan on the ceiling!

scaffold.jpg
 
View attachment 1715168328

I really need to get back on my Porsche 356 restoration, as soon as

View attachment 1715168329

I pull the body off the frame on my 1922 Dodge Bros. touring car to repair rust-outs, as indicated

View attachment 1715168330

as soon as I finish installing drywall, an electric heater and fan on the ceiling!

View attachment 1715168331

Went through Diamond Springs a couple of weeks ago on our way from Auburn to Sonora (then home to Fresno) for the worst $15 burger I've ever had...
 
Just an old outside shot of my joint... bought it for $3500 around 1994. It was 5000 sq. ft. Took 1800 of that 5G and disassembled it and moved it 25 miles to my place. Sold the rest of it for $3000.00. So my cost was $500.00. All in with a new door, concrete, electric service and such I have $5,000.00 in it.
front of shop 2006.jpg
 
Went through Diamond Springs a couple of weeks ago on our way from Auburn to Sonora (then home to Fresno) for the worst $15 burger I've ever had...

Jim, I think there's more than one place that can ruin a hamburger in Placerville and Diamond Springs. At first I thought you meant a certain place in Diamond Springs that makes a really terrible burger, but I don't think they charge $15. At least I hope not. But I'm actually kind of glad there are no good restaurants around here, so I cook at home instead and save money. More money to spend on the chariots that way.
 
-
Back
Top