KICKDOWN

[doopdoop67]

Hey guys I’m wondering if anyone has pictures of there lokar kickdown cable on both the transmission and carburetor. I don’t know how The cable goes into the kickdown arm on the transmission. And how do you route the cable. Pictures would be great! Thanks

 

[Hellrats]

Found these on the net but this is how I routed them before

 

[Hellrats]

You may need to add a return spring too

 

[doopdoop67]

Found these on the net but this is how I routed them before

View attachment 1715168301

View attachment 1715168302

Thanks that helps a lot. Now just need to figure out how to get it on the carb

 

[TrailBeast]

You may need add a return spring too

Yep.
I just ran a light spring from the base of the stud that goes through the arm on the trans to that front cooler line.
Just enough to pull the lever and cable all the way forward under zero throttle.

 

[doopdoop67]

Yep.
I just ran a light spring from the base of the stud that goes through the arm on the trans to that front cooler line.
Just enough to pull the lever and cable all the way forward under zero throttle.

Will do!

 

[TrailBeast]

Thanks that helps a lot. Now just need to figure out how to get it on the carb

If you go to google.com and click on "Images" then do your search like "lokar throttle pressure cable" it comes up with pictures of about every way it can be done.

Like this Lokar throttle pressure cable - Google Search

 

[doopdoop67]

If you go to google.com and click on "Images" then do your search like "lokar throttle pressure cable" it comes up with pictures of about every way it can be done.

Like this Lokar throttle pressure cable - Google Search

I got it all done thanks for all the help

 

[dusted]

Bouchellion has a nice one too that is an OEM cable from a 93-02 dodge truck. Looks factory and you can buy bracket for the throttle cable also.