Dyno day! How much power?

[doogievlg]

Tomorrow the engine goes on the dyno so I figured we could guess some numbers.

360 .30 over
10:1 compression
Edelbrock heads slightly ported
Flat top pistons
Roller cam .522 intake duration is .235/249 at .50
Mopar adjustable rockers
Performer rpm intake
Holley 750 dp

Cookie cutter build so I’m sure a lot of you guys will be really close.

 

[stixx]

That should make a nice engine!

485HP@6100
466TQ@4600

 

[doogievlg]

That should make a nice engine!

485HP@6100
466TQ@4600

I’m not that optimistic but it would be sweet.

 

[stroked340]

396 h.p.
380 t.q.

 

[4spdragtop]

385 hp
380 t's.
Have fun!

 

[replicaracer43]

420 HP and 410 tq

 

[doogievlg]

385 hp
380 t's.
Have fun!

The goal was 400hp or more. We shall see.

 

[stixx]

I’m not that optimistic but it would be sweet.

I think my horses guesstimate is too high.
By how much we will see...

 

[gregsdart]

448 hp, at 6,000, tq 460

 

[thesiren74]

431hp 415tq

 

[roccodart440]

Depends a lot on the dyno and the dyno operators ability.

 

[12many]

380hp 445tq

 

[doogievlg]

Depends a lot on the dyno and the dyno operators ability.

The shop says they have “stingy” dynos but I am confident in the guy running the dyno.

 

[rumblefish360]

Goal of 400+ hp?
You got it IMO.
But I await......

420 or better HP.

 

[doogievlg]

I took a half day off work tomorrow to make the hour and a half drive up to the builder for this. Only big thing left to buy is the Frank Luppo converter.

 

[B3422w5]

435 horse

 

[roccodart440]

345hp, 395tq

 

[doogievlg]

345hp, 395tq

Any reason you think it would be so low?

 

[roccodart440]

thought it was stock iron headed.

 

[doogievlg]

thought it was stock iron headed.

Na. Edelbrocks

 

[rustycowll69]

375hp, 380lbft

 

[jimjimjimmy]

410 hp 390 tq

 

[skrews]

Just tell the operator to keep adjusting things till it makes the power you want. Ta Da

Seriously should make 430ish HP

 

[yellow rose]

If everything goes right I'm saying

420-435 HP

370-385 TQ

Should peak at 6200-6400 and shift about 6800 depending on gearing and converter.

 

[Blackhatguy]

This?