[WANTED] WANTED! 318 pulleys

-
Status
Not open for further replies.

ariffle

Fish Shouldn't Rust
Joined
Sep 18, 2012
Messages
749
Reaction score
297
Location
Camano Island, Wa
Rating - 100%
1   0   0
Contact seller
I am looking for pre. 1974 318 crank pulley that is 7 1/4 inch in diameter and a matched water pump pulley at 5 3/4 inch diameter. This is a non power starring and non a/c setup. But I'd like a double grooved water pump pulley and a double crank pulley. The bolts for the crank pulley would be needed as well. P.M. me please!
 
Look on e-bay lots of pulleys listed (IMHO there is no need to have 2 belts just to run the alt. My stock 67 273 no power steering no AC only has one belt and single pulleys with no issues)
 
I do have this stuff and its on a motor that is buried behind everything. I would have to get at it, look it over and decide how much I want to be willing to part with it.
 
I am looking for pre. 1974 318 crank pulley that is 7 1/4 inch in diameter and a matched water pump pulley at 5 3/4 inch diameter. This is a non power starring and non a/c setup. But I'd like a double grooved water pump pulley and a double crank pulley. The bolts for the crank pulley would be needed as well. P.M. me please!

look here: 1974 318 crank pulley | eBay
 
I do have this stuff and its on a motor that is buried behind everything. I would have to get at it, look it over and decide how much I want to be willing to part with it.
I might have found what I need, I won't know for sure until Monday the 27th? Anyways, thank You! I will let you know. I appreciate everyone's help.
 
Status
Not open for further replies.
-
Back
Top