Thermoquad float

-

zakimodo

Well-Known Member
Joined
Dec 11, 2005
Messages
395
Reaction score
78
Location
Berthoud Colorado
Is this brass float built right? It seems like the hump on the brass float should face up towards the top plate. I have only ever delt with nitrophyl floats.

20181026_164416.jpg
 
Thanks, when I adjust the brass floats, I assume I measure to the top of the hump? High point of the float.

I set mine differently. I use a drill bit under the float to do mine.
 
-
Back
Top