[FOR SALE] Kick down linkages

[oldkimmer]

A and B body big and small block. $20.00 usd and up per piece plus shipping. I’ll sort them out later and post better pics. Thanks. Kim

 

[oldkimmer]

Pics

 

[MoparMark91]

Complete linkage setup for 340 with a 904 behind it? A body of course

 

[oldkimmer]

More

 

[oldkimmer]

More

 

[oldkimmer]

Complete linkage setup for 340 with a 904 behind it?

What car is this 4? Kim

 

[MoparMark91]

What car is this 4? Kim

1971 dart with a 340 and a904
Not stock intake either
Eddy rpm air gap

 

[oldkimmer]

Most likely. I’ll check tomorrow. Kim

 

[MoparMark91]

Most likely. I’ll check tomorrow. Kim

Okay thank you

 

[oldkimmer]

What carb are u using?

 

[MoparMark91]

What carb are u using?

Holley 4150 4 barrel vacuum secondary electric choke

 

[oldkimmer]

Do u have the dodge linkage adaptor on it. Post a pic of the drivers side of the carb. Kim

 

[MoparMark91]

Do u have the dodge linkage adaptor on it. Post a pic of the drivers side of the carb. Kim

No i dont believe so and i havent even mounted it yet still in box
Holley 4150 Classic Carburetors 0-80783C

 

[oldkimmer]

Just ask summit for the Chrysler linkage adaptor. Kim

 

[MoparMark91]

Just ask summit for the Chrysler linkage adaptor. Kim

Summit really wasnt a big help told them my setup and they helped with the throttle cable i guess but not the kickdown

 

[oldkimmer]

It’s an adaptor that bolts on the drivers side of the carb to have the proper geometry for Chrysler products. Kim

 

[MoparMark91]

It’s an adaptor that bolts on the drivers side of the carb to have the proper geometry for Chrysler products. Kim

But wont i still need the linkage to the tranny cause i dont have one

 

[oldkimmer]

It’s a Holley 20-7 throttle lever extension. Summit has it. I just checked. Kim

 

[oldkimmer]

Yes u will. I’ll get it figured tonight or tomorrow for u. Kim

 

[MoparMark91]

Yes u will. I’ll get it figured tonight or tomorrow for u. Kim

Alright thank you

 

[3rdLM23P9]

Kim, need a set for '69 Dart GTS, 340/727 console - Edelbrock 1406 (likely going to AVS2).
Thanks,
Dick

 

[oldkimmer]

I’ll put u in line. Kim

 

[dart1]

Hi Kim, sent you a pm for lower rod (going to tranny). Thanks

 

[3rdLM23P9]

I’ll put u in line. Kim

OK thanks.

 

[65Val]

...
It’s an adaptor that bolts on the drivers side of the carb to have the proper geometry for Chrysler products. Kim

@MoparMark91 Mark...this is the adapter Kim's referring to...