Keith black small block found/info

-

Jerry gray

Well-Known Member
Joined
Jun 1, 2016
Messages
316
Reaction score
314
Location
Zuni va.
I'm searching for any information about a pair of blocks I found.no date code.has 3614530. Ws and what looks like Keith black insignia I have seen a few articles about some small blocks.but nothing reference to the number on the block. I will post a picture I'm new to this forum thing and computers .my wife thinks it's funny. I will figure it out.might take a minute.thanks in advance for any information you guys might be able to give.
15573594718908056073350981514908.jpg
15573595090246974954185428567358.jpg
15573595695456613806186171669832.jpg
 
I'm searching for any information about a pair of blocks I found.no date code.has 3614530. Ws and what looks like Keith black insignia I have seen a few articles about some small blocks.but nothing reference to the number on the block. I will post a picture I'm new to this forum thing and computers .my wife thinks it's funny. I will figure it out.might take a minute.thanks in advance for any information you guys might be able to give. View attachment 1715332553 View attachment 1715332554 View attachment 1715332555
Oooh! I want that.
 
That was quick,thanks again. I have 2 of them both been checked and good.1 is 4.040 other is 4.080 .the water jackets do look smoother than normal and has been modified for AN fitting@oil filter.they came from machine shop in Norfolk VA.owner died and estate sold the stuff.$600. I'm thinking#3and#5 might hold water on these blocks
 
Is there a casting date on the blocks or just the part number. Interesting stuff!
2 KB blocks for $600? Man, I hope they're good, because you sir, have hit the jackpot.
I just got them from the.machine shop.he says they are good.on has had a sleeve put in. Ed Miller and another guy bought everything Mopar
They didn't want anything small block.didnt know what they had. I didn't either but I knew I wanted it
 
I just got them from the.machine shop.he says they are good.on has had a sleeve put in. Ed Miller and another guy bought everything Mopar
They didn't want anything small block.didnt know what they had. I didn't either but I knew I wanted it
I did win $500 yesterday on a $2 ticket at lunchtime.so I kinda got all but $102 back.
 
Yeah well, you got that $102 and then some with those 2 blocks
I'm going to put one in my barracuda and get it down in the 6:30 range.been low 7 forever.cars in footbrake running 5:90 take my finish line race away.go by so fast I can't do anything but keep em honest and.
try not to break out. I also found a Dana 60 abody rear disk brakes powder coated with a posi unit on Craigslist for$350. I was racing Ed Miller to the man's house to get there first. I got it.
 
Wow, nice score. Have you measured the bores? You wanna sell one?
 
4.040 and 4.080 don't really want to sell I'm not sure what they are worth.but they are nice pieces.

Idk what this is doing in the lost and found if he is not looking to let them go.
Sounds like they're in good hands...lmao.
hope they dont go to waste as a conversation piece in the corner of the garage or get used for some low powered street motor. Those suckers need 4"+cranks, w2's and a tunnel ram!!
Make Keith Black proud.
 
Idk what this is doing in the lost and found if he is not looking to let them go.
Sounds like they're in good hands...lmao.
hope they dont go to waste as a conversation piece in the corner of the garage or get used for some low powered street motor. Those suckers need 4"+cranks, w2's and a tunnel ram!!
Make Keith Black proud.
Idk what this is doing in the lost and found if he is not looking to let them go.
Sounds like they're in good hands...lmao.
hope they dont go to waste as a conversation piece in the corner of the garage or get used for some low powered street motor. Those suckers need 4"+cranks, w2's and a tunnel ram!!
Make Keith Black proud.
Idk what this is doing in the lost and found if he is not looking to let them go.
Sounds like they're in good hands...lmao.
hope they dont go to waste as a conversation piece in the corner of the garage or get used for some low powered street motor. Those suckers need 4"+cranks, w2's and a tunnel ram!!
Make Keith Black proud.
 
Idk what this is doing in the lost and found if he is not looking to let them go.
Sounds like they're in good hands...lmao.
hope they dont go to waste as a conversation piece in the corner of the garage or get used for some low powered street motor. Those suckers need 4"+cranks, w2's and a tunnel ram!!
Make Keith Black proud.

AMEN !
20190219_193141.jpg
 
Sorry if I entered the request for information on the wrong category. But it worked, quick too. I'm besides myself this morning.those things are a piece of history for sure. I looked up the story about the Indy program with STP. granatelli, gurney and art Pollard. Cool story.my hands definitely good. I'm planning to put the 4" rotatating assembly from the short block that was in the dart. I can't find another W2 head to match the broke head.going with the eldebrock Victor 16 degree heads .the numbers on the flow chart are best of the small block heads available new that I have seen. And sorry for any confusion about intentions to sell.im working on my forum procedure.and category selection.have a good day and be nice
 
Sorry if I entered the request for information on the wrong category. But it worked, quick too. I'm besides myself this morning.those things are a piece of history for sure. I looked up the story about the Indy program with STP. granatelli, gurney and art Pollard. Cool story.my hands definitely good. I'm planning to put the 4" rotatating assembly from the short block that was in the dart. I can't find another W2 head to match the broke head.going with the eldebrock Victor 16 degree heads .the numbers on the flow chart are best of the small block heads available new that I have seen. And sorry for any confusion about intentions to sell.im working on my forum procedure.and category selection.have a good day and be nice
Haven't had them side by side... but look into the trickflow heads. Other than that I have seen a w2 single for sale here and there. Racing junk, Ebay, guys on here. lucky find, best of luck!
 
Haven't had them side by side... but look into the trickflow heads. Other than that I have seen a w2 single for sale here and there. Racing junk, Ebay, guys on here. lucky find, best of luck!
The eldebrock Victor will allow me to use the same headers.i will look at the trick Flo.thanks
 
This just arrived yesterday .... 604b1duster picked it up for me and shipped it out.
Would top of that block and some W2s as the ultimate sleeper !
20190509_083102.jpg
20190509_083203.jpg


Factory cast iron W2 intake..NOS
 
-
Back
Top