[WANTED] 4 speed console side cover

-
Status
Not open for further replies.
4404spd

4404spd

Well-Known Member
Joined
Nov 23, 2010
Messages
1,612
Reaction score
80
Location
Towanda PA.
Rating - 0%
0   0   0
Contact seller
Need a hump side cover for my console. Anyone help me out. No one makes them.

036.jpg


039.jpg
 
this is a rare 71 style. 69 and earlier were cardboard and only the front half 1/2 fastened with one screw . 71 fastens with three screws. 71 will fit your 69 console but you will have to drill the front and rear screw holes.

Picture 037.jpg


Picture 039.jpg


Picture 041.jpg


Picture 043.jpg
 
No such thing as a 71 console 4-speed, not in the 1970 or 1971 parts manuals. They quit making them in 1969! There used to be a guy who made them out of fiberglass and sold them on eBay 15 years ago...
 
I sold it to someone who was going to make them. I never heard from him again. It wouldn't be hard to just make one. I gets covered with carpet and then install unlike the early that were part of the carpet. Look at it make a mold with soft wire and foam fitted to the console and put your glass on. If I still had a 4spd console I would make the mold. I trusted him to make them . Steve
 
Oldmanmopar said:
I sold it to someone who was going to make them. I never heard from him again. It wouldn't be hard to just make one. I gets covered with carpet and then install unlike the early that were part of the carpet. Look at it make a mold with soft wire and foam fitted to the console and put your glass on. If I still had a 4spd console I would make the mold. I trusted him to make them . Steve
Click to expand...
I am also in need of one of these covers if any come up for sale. Thank you
 
Status
Not open for further replies.
-

Back
Top