[FOR SALE] 8 3/4 Axle Housing

-
Status
Not open for further replies.

70 Challenger

Member
Joined
Sep 10, 2019
Messages
9
Reaction score
4
Location
Brunswick, GA
Rating - 0%
0   0   0
Contact seller
8 3/4 Axle Housing only. No bearings, no axles, no diff or diff cover, just the axle housing.

Price is $50
Location: Brunswick, GA. 31525

88F52E4F-F2D4-43EE-BB40-15AA2E146A6A.jpeg


CCAF34C2-BAF6-44FC-BC78-59EC6318C765.jpeg


2D71D969-B2E9-4523-834F-F303BC0C731F.jpeg


5E99DC64-80A3-4297-880F-28D62DF6C6A1.jpeg


EDA7EF07-B7F9-4C72-A6BD-526A53D59500.jpeg
 
Last edited:
would a 8.75 have a diff cover??? Yes, pictures please.....
 
You are correct, an 8 3/4 doesn’t have a diff cover. Sorry, I used the incorrect terminology, still new at this hobby. Pictures have been posted
Can't read the tape, how long is it measuring. Thanks
By the way, Welcome to the site and the hobby :)
:thumbsup:
 
Can't read the tape, how long is it measuring. Thanks
By the way, Welcome to the site and the hobby :)
:thumbsup:
Outer “flange?” to outer flange (where the studs start to bolt on the drums is 56 1/2 inches. Center of bolt hole to center of bolt hole where U bolts would attach is approx 46 inches
 
Outer “flange?” to outer flange (where the studs start to bolt on the drums is 56 1/2 inches. Center of bolt hole to center of bolt hole where U bolts would attach is approx 46 inches
Ok, thanks. Sounds like a E or C body. Little wide for me, but they can be narrowed. Somebody here will grab it for sure.
 
Status
Not open for further replies.
-
Back
Top