[SOLD] 4 Speed OD Aluminum Case Transmission

-
Status
Not open for further replies.

bradfields

Well-Known Member
Joined
Apr 6, 2010
Messages
182
Reaction score
9
Location
Indiana
Rating - 100%
5   0   0
Contact seller
The shifter, rods, etc. have sold, I still have the transmission for sale, there is no speedometer housing or gear.

$200.00 plus shipping from Indiana - zip 47872
EFCE5955-CF93-4149-AD3B-6765CAA1850F.jpeg
844003C4-1F81-4011-ABED-0A8573B816A4.jpeg
1F798A76-ADDF-49EB-AC96-876E0735DA38.jpeg
D67D0DDB-AB19-4422-B768-2438C89ABA3E.jpeg
14623C1D-D5AB-40FA-BD58-24F4EC693160.jpeg
7C1A59A7-DDA2-44C1-AA05-5F04BFD82604.jpeg
2EE4CDD7-4BB8-4060-89B7-B053F47E4C9C.jpeg
FB833F05-21CD-4D73-A714-A0B6391AFAA9.jpeg
 
Will this bolt up to the small block mopar bell housing or was this one of the ones that had the GM pattern?
 
Will this bolt up to the small block mopar bell housing or was this one of the ones that had the GM pattern?

That's a Chrysler truck a833OD. Yes, it will bolt right to a small block bellhousing.
 
That's a Chrysler truck a833OD. Yes, it will bolt right to a small block bellhousing.
It will depend on which small block bellhousing. The input bearing retainer is slightly bigger then a regular A833 transmission. Thanks to Brewers Performance for the information and the measurements to make it fit.
 
It will depend on which small block bellhousing. The input bearing retainer is slightly bigger then a regular A833 transmission. Thanks to Brewers Performance for the information and the measurements to make it fit.

I was assuming everybody knew that. My bad.
 
Status
Not open for further replies.
-
Back
Top