[WANTED] 318 Cast heads # 2843675

C2ndLTpigeon · Feb 21, 2021

Looking for a set of 318 heads for my 73 block. Original casting numbers are 2843675. Looking for a set around that era, not interested in heads with the smog holes. If some one has a set kicking around wasting space on a shelf in the garage in bolt on ready condition for a good deal please let me know. Shipping would be to California so the closer the better for ship costs.

RAT ROD AL · Feb 21, 2021

I may have them , I'll check and let you know.

C2ndLTpigeon · Feb 21, 2021

RAT ROD AL said:
I may have them , I'll check and let you know.

Thanks AL!

Garrett Ellison · Feb 21, 2021

@Scubakuda19

SGBARRACUDA · Feb 21, 2021

If Al doesn’t have them. I should have a set.

73scamp72dart · Feb 22, 2021

I have a pair I just removed off my 73 Scamp with a 318. The car was driven by a lady for over 45 years, don't think it ever exceeded 3000 rpm.

See photos...let me know.

GTX JOHN · Feb 23, 2021

I have a very nice virgin set ...........$125.00
I will deliver them to Indio for.........$25.00

Do you want pics of them to go with 340 pics I sent you last month?

C2ndLTpigeon · Feb 23, 2021

GTX JOHN said:
I have a very nice virgin set ...........$125.00
I will deliver them to Indio for.........$25.00

Do you want pics of them to go with 340 pics I sent you last month?

By virgin you probably mean they will probably need a rebuild?

C2ndLTpigeon · Feb 23, 2021

If I may make my post more clear,

Im looking for a set that would pretty much be bolt on ready or just need a simple valve lap and cleaned, with hardened seats. I have a set but they need a full rebuild due to bent valves. I would rather find a set that is ready to go. I just need bare heads. No valves, springs or keepers. Thanks.

GTX JOHN · Feb 23, 2021

C2ndLTpigeon said:
If I may make my post more clear,

Im looking for a set that would pretty much be bolt on ready or just need a simple valve lap and cleaned, with hardened seats. I have a set but they need a full rebuild due to bent valves. I would rather find a set that is ready to go. I just need bare heads. No valves, springs or keepers. Thanks.

By Virgin it implies that they are unmodified/ported/ or otherwise modified from original stock condition. They are complete and off a running engine. I always do a valve job anyway when I use used heads but that is up to you to decide.

C2ndLTpigeon · Feb 23, 2021

GTX JOHN said:
By Virgin it implies that they are unmodified/ported/ or otherwise modified from original stock condition. They are complete and off a running engine. I always do a valve job anyway when I use used heads but that is up to you to decide.

Ill take a look at them then, you can send some pics to the same email you sent me the 340 pics! Thanks.