[FOR TRADE] Wanted: 1.6 Pedestal or Stud Roller Rockers

-
Status
Not open for further replies.

thomasfouraker

Well-Known Member
Joined
Feb 2, 2020
Messages
143
Reaction score
47
Location
Jacksonville
Rating - 100%
1   0   0
Contact seller
I have some Harland Sharp 1.7 rockers for 5/16 pedestal mounted Magnum heads. Part S70037

Looking for part S70036 or S7306

Looking to trade for 1.6 Harland Sharp 5/16 pedestal or 3/8 stud mount rocker arms.

The 1.7 will outfit my springs.

Willing to buy or trade.

Thanks!
 
I have some Harland Sharp 1.7 rockers for 5/16 pedestal mounted Magnum heads. Part S70037

Looking for part S70036 or S7306

Looking to trade for 1.6 Harland Sharp 5/16 pedestal or 3/8 stud mount rocker arms.

The 1.7 will outfit my springs.

Willing to buy or trade.

Thanks!

I`ve got a 1/2 set of lifetime gaurateed 1/6 , 3/8 sud scorpian rockers , had them on a sbc 406 for a very very short time , they showed me I needed a bigger cam is only reason they are so new .
 
I`ve got a 1/2 set of lifetime gaurateed 1/6 , 3/8 sud scorpian rockers , had them on a sbc 406 for a very very short time , they showed me I needed a bigger cam is only reason they are so new .

I wonder how well they would mount up geometry wise. I tried a set of Harland for a 302 Ford and the geometry was off a good bit compared to the other Harland Sharps I have that are 1.7 but the geometry and sweep is dead on for those. Tons of clearance between the rocker and retainer as well.

Are you wanting to sell them?
 
I wonder how well they would mount up geometry wise. I tried a set of Harland for a 302 Ford and the geometry was off a good bit compared to the other Harland Sharps I have that are 1.7 but the geometry and sweep is dead on for those. Tons of clearance between the rocker and retainer as well.

Are you wanting to sell them?

YES , WANTING TO SELL THEM , ARE THEY THE SAME , DONT KNOW , U MAY HAVE TO CALL OR RESEARCH THAT.---------?? Summit or jegs might be able to tell u.
THINK I GOT THE STUDS TOO, WOULD HAVE TO LOOK .
 
Status
Not open for further replies.
-
Back
Top