[SOLD] 1976 dart sport part out

-
Status
Not open for further replies.

skep419

No show, all go!
Joined
Sep 18, 2008
Messages
5,888
Reaction score
4,962
Location
Minesoooota
Rating - 100%
4   0   0
Contact seller
located in Clarkfield MN
Car is very rusty and full of mouse piss.
I’m keeping the k frame assembly.

Passenger door was stuck. Pry bar marks on the inside and all the latch assembly and rods are jacked. Drivers side is good. $150 for both.

Wheels are BBP 14 and look to be 5.5 wide $25 each

engine wiring harness $100

dash assembly $150

fenders $150 each

beak $75

steering column $50

I’ll post most pictures
Let me know what you need and I can take better photos.

I'm a 67-69 dart guy so no idea what this stuff goes for. shooting from the hip. make an offer.





D2BD1757-313F-4703-8222-0AAD2E3F7549.jpeg
9E59F148-51D0-4E30-9FC4-E280A7AD1A97.jpeg
4E8A041E-F6BC-4B59-97DF-390F2DC12A97.jpeg
A06B04EC-FC9E-45EC-8EF2-EEA962E743D2.jpeg
7C7CA0DB-AEEA-4C39-BB75-CD916FB1D80D.jpeg
BBE0E108-F35D-4668-8DDB-BCB5D81A2E55.jpeg
D41D7D4A-290A-47AD-A690-FA62C2434ECB.jpeg
07C85EB9-CDD5-4CAD-82F1-15DF1AB22D04.jpeg
4A8FC3AC-F1F2-4853-BCFB-C1DDDE23B93C.jpeg
C70110B2-49AA-494E-895B-AF6F237B50AA.jpeg
 
Last edited:
How much for the antenna? I would be interested in the license plate light if you haven't sold it.
 
Got it down to the bones. How many hours did that take to accomplish?
 
Rear bumper was full of gravel. Cut off wheel and air chisel to get the bolts out. Half of them broke. Not sure if any of it is salvageable.
A1D699DA-3F88-42C0-8EE9-FF80F7980371.jpeg
83B46767-7A39-4D49-9F8F-2F517860CDAA.jpeg
C02BBB9C-E160-4ACE-88D1-526BD9AE7D60.jpeg
CC6B9EB1-3863-4D17-934A-D6E208AB3DE0.jpeg
A24959F2-4CC0-429F-ACEB-C3F261E15E6A.jpeg
1B74E5FB-3B3B-4B91-8928-8449AB8D581F.jpeg


F1D74862-C0B1-4FDB-9C4C-DCA680BC06B5.jpeg
 
Got it down to the bones. How many hours did that take to accomplish?
Few weekends. 20-30 hours
Nothing came apart easy and I tried to take everything apart nice.
1 full can of PB blaster
3 cans of brake clean killing wasps
1 flex head harbor freight 3/8 ratchet
(Busted it on an upper control arm bolt)
 
a got a 74 i not sure but is their a ground wire on the bottom of the dash near the instrument cluster i need that screw and the 2 brackets that hold the blinker and the 4 way blinker
 
a got a 74 i not sure but is their a ground wire on the bottom of the dash near the instrument cluster i need that screw and the 2 brackets that hold the blinker and the 4 way blinker
573E7013-8F56-4EBC-969C-985F32C35C12.jpeg
1779D449-9791-476F-B428-E817AA7053AA.jpeg

not sure what you need. Let me know if it’s in the pictures
 
what i want is where i put the red circle the screw and bracket i put an arrow at the key in buzzer would like to know were is it connected to also the blinker is under the cig ligher dose it have a bracket

Inked76 dash_LI.jpg
 
can you drill or chisel or the bracket the holds the key in buzzer and the seat belt INTERLOCK MODULE i circled a picture of it

Inked76 dash 3_LI.jpg
 
How are the inner fenders? I need patch panels from the center of the shock tower back to the fire wall.
 
Status
Not open for further replies.
-
Back
Top