Stop in for a cup of coffee

-
Steering coupler hits header. Take it back out and trim some off the coupler

20210724_095528.jpg
 
Perfect now. Shimmed the left motor mount. Actually gives more valve cover clearance. Moves engine away from booster

20210724_103917.jpg


16271484587423797234352851631679.jpg
 
Good Morning!
today was the first "legal" drive with my car to go get gas.
25.00 to get 6 gallons. :mad:
However, it was around 89 degrees and it stayed cool!
a lost a dust cap, then i need to tighten a brake hose that got a little loose.
last thing to do before the first day of school is to move the seat three inches back.
 
Long damn backread. Youse guys was busy!
Trailer back together and loaded with scrap again. Still trying for the 3 ton mark. Will see.

went to town in The Fargo, guy is admiring it. “What year?” I reply 51. Says would be nice to have one, but i have to get rid of my wife first! i replied, No Trades!
my wife was laughing so much, she almost peed:rofl:
 
Evening all. Been a very bad last few days. I’m getting drunk tonight
 
me too... But I've had a great few days. Sorry for your troubles.
Thanks. Who knew that a single person was the glue holding everything together!

Anyway, I did get a chance to briefly work on the dart. Designing a way to mount my fuel cell in a similar manner as a factory tank. Well kind of. By the class rules I’ll be in, it has to be fully enclosed by a steel bulk head. On all 6 sides. So I’m building basically a steel cage out of 1/8 angle and flat, then lining the inside with 16 gauge sheet metal. Then that will drop down from the top in place of where the normal fuel tank and spare tire wheel goes.
 
Pork tenderloin going on the BBQ!
Every weekend we go to a friend’s place and enjoy a great meal.
 
-
Back
Top