Tunnel ram Tuesday!!!...

-
I've got a set of 660s to try when/if I go to the track with the Roadrunner but I understand that because they have no power valve circuit they are not a street carb.
 
Here is mine.

IMG_8664.jpg


IMG_8666.jpg
 
Nice, I like those valve covers.
Thanks Jay! These are just the Indy's with spraybars added, I had our local guy "Bill" of QC coatings put 'metal vane' ? powdercoat on. I also cut-out and added the "M" sticker. I do get a bunch of compliments on these but they were probably $600...ooof damn, hate to even remember.
 
Post 136. Nice car. But do not see the point of installing a high air flow intake & then choke it with tiny A/C filters.
 
Post 136. Nice car. But do not see the point of installing a high air flow intake & then choke it with tiny A/C filters.

I have velocity stack style ac bases with large K&N air cleaners too for the track. Around town the small air cleaners don’t choke it out according to my A/F gauge.

CC7970FC-31C6-4634-8F25-6A9073549B78.jpeg


0301E757-0B0B-4917-A9BD-5B99E29C0D7B.jpeg
 
Are you spraying oil on the valve springs or rockers with your external, through the valve cover line?
These covers were bought for a different build in which I needed the 'spray and pray' system. E.G.-Pray the trajectory is correct AND adequate to oil both the fulcrum and the pushrods! Because this engine is 'pushrod' oiled, I don't need the spraybars but they can't hurt. the springs get hot etc.
 
Wake this thread up. As always, a day late and a dollar short. Any additions?
 
-
Back
Top