Any Proper Placement For Scoop Emblems?

-

72DartGuy

Well-Known Member
Joined
Jun 3, 2022
Messages
507
Reaction score
439
Location
San Diego Ca
My Dart was going to get a 340 in it. That didn’t work. Wound up with a Stroker instead . Is there a real measurement for placing the scoop emblem? Is it just what fits best? Only get one chance to do it right. Thanks!

9E512ABC-D0F4-4D47-BC14-E003BCB5F6DA.jpeg
 
My Dart was going to get a 340 in it. That didn’t work. Wound up with a Stroker instead . Is there a real measurement for placing the scoop emblem? Is it just what fits best? Only get one chance to do it right. Thanks!

View attachment 1715941047
Holy Toledo..!! Those emblems look big..!! I would guess they don’t have pins. I would say look for photos (images) and place the where they look best. Where you are now is not to far off. The stock 340 emblems were pinned and pretty small…Good luck they will look sharp on the car..!! Swingn’
 
I was thinking they might be a bit big too. They aren’t pinned. It’s 1 3/8” tall
 
I was thinking they might be a bit big too. They aren’t pinned. It’s 1 3/8” tall
Are you running the chrome bezel or black bezel on the scoop..?? If so I would have it on before you nail ‘‘‘em down. It will help you see the final look. It looks like my stock emblem is about a 1/2” shy of the edge of the mounting edge for the bezel.
 
Are you running the chrome bezel or black bezel on the scoop..?? If so I would have it on before you nail ‘‘‘em down. It will help you see the final look. It looks like my stock emblem is about a 1/2” shy of the edge of the mounting edge for the bezel.
I wasn’t going to use any bezels. My car doesn’t have any real chrome on it. Everything is the brushed stainless stuff
 
I wasn’t going to use any bezels. My car doesn’t have any real chrome on it. Everything is the brushed stainless stuff
Yep, just place them where they look best to your eye. You will get it..!! Swingn’
 
-
Back
Top