Stupid Question, Please take it easy on me!

-

72DartGuy

Well-Known Member
Joined
Jun 3, 2022
Messages
507
Reaction score
439
Location
San Diego Ca
I have a 904 trans with a floor shifter in my car. I’m going to change it to a 727 when my new motor is built. Here’s my stupid question. Is the shifter linkage the same on both trannys? I’m putting a center console in and need to know if I can do it now or if I need to wait for the 727 trans. Thanks guys!
 
I have a 904 trans with a floor shifter in my car. I’m going to change it to a 727 when my new motor is built. Here’s my stupid question. Is the shifter linkage the same on both trannys? I’m putting a center console in and need to know if I can do it now or if I need to wait for the 727 trans. Thanks guys!
Going from a small block to a big block?
 
Bell housings different? Arent 727 sb kinda hard to find? I'm sure you've looked into it, but just in case.
:thumbsup:
 
Last edited:
Nuthin stupid about it. All I can add is make DANG sure your shift cable is routed away from exhaust. The results from not doing that would suck. lol
 
You can't have a mopar "posi"...but maybe a sure grip.
Why does that bother me when a mopar centre section is called a chev nickname?
 
You can't have a mopar "posi"...but maybe a sure grip.
Why does that bother me when a mopar centre section is called a chev nickname?
That’s funny, it’s just what the rear end guy called it. This is my first Mopar project so I’m usually a combination of surprised or confused!
 
First, that was not a stupid question.
Second, you're REALLY going to regret putting in the stroker. Your gas mileage is going to drop significantly. :rofl:
 
You can't have a mopar "posi"...but maybe a sure grip.
Why does that bother me when a mopar centre section is called a chev nickname?
suregrip.jpg
 
-
Back
Top