UPS came early today. Cheap spray guns.

-
homecloned

homecloned

Can't re Member
Joined
Apr 27, 2009
Messages
5,994
Reaction score
70
Location
Tampa Bay, Florida
I orderd these off e-pay $83.00 to the door. I know there very cheap but will work for what im doing(i've been useing cheap guns forever with good results).I think its a pretty good deal, 2 full size, 1 touch up, regulator, water trap, cleaning kit and stand. I'm gonna go play with it now. :-D

DSC00003 (Custom).JPG


DSC00005 (Custom).JPG
 
I loved it when the gravity feed guns came out. So much easier to handle and cleen.
I was raised on a Binks old #7 :-D
Great deal, I need to borrow the touch up gun and paint my sons #ers on his race car # 247 :-D
 
My boss has the same set and uses them often. He did finally break down and buy a set of Iawa's though.

Memike, My boss used those binks #7s for years. He says its like painting a car with a firehose, LOL
 
Just painted my interior with guns like that, the cup gets in the way in tight spots, and only shoots 7". to finish, I'm thinking about going to the hardware store and buying fittings and some small hose, in order to hang the cup outside the car. It is siphon.
 
Thanks for the replies. I have not had a chance to try these yet due to we have had rain all week and I keep the car in the garage when it rains while I work on it. But we need the rain badly so i'm not complaining. This will be my first use a gravity feed type gun. Yeah I was wondering about certain situations green1, thanks for the heads up. The only quality gun I own is my Binks touch up gun. All the rest have been crap and I have had good results. It all come's down to your technique and skills. I'll keep ya's posted.
 
Good Lord that's cheap :shock: I have 3 Sata RP's (1.3, 1.6, 2.5) and an Iwata LPH400 with orange and silver caps, don't ask what that all cost :sad1:
 
challengergary said:
What size tips come with these guns? Seems like a helluva deal especially if it comes with a variety of tips.
Click to expand...

1.8 and 1.4, they advertised it as a primer color combo.

Rob said:
Good Lord that's cheap :shock: I have 3 Sata RP's (1.3, 1.6, 2.5) and an Iwata LPH400 with orange and silver caps, don't ask what that all cost :sad1:
Click to expand...

My buddy does collision/auto body repair and was showing me some very cool $$$$$$$ stuff. I can't remember the makes but they were around $700.00 each.
 
homecloned said:
1.8 and 1.4, they advertised it as a primer color combo.



My buddy does collision/auto body repair and was showing me some very cool $$$$$$$ stuff. I can't remember the makes but they were around $700.00 each.
Click to expand...


Yeah that's about right, makes me ill when I think about it #-o The bigger tipped ones were somewhat cheaper but the 1.3 RP and the Iwata were all of that.

Nice tip sizes you got by the way, 1.4 for BC/CC or SS and the 1.8 for your primers, perfect :-D
 
Rob said:
Yeah that's about right, makes me ill when I think about it #-o The bigger tipped ones were somewhat cheaper but the 1.3 RP and the Iwata were all of that.

Nice tip sizes you got by the way, 1.4 for BC/CC or SS and the 1.8 for your primers, perfect :-D
Click to expand...

Yeah i'm pretty excited to try them out but I know better then to rush things.
 
homecloned said:
Thanks for the replies. I have not had a chance to try these yet due to we have had rain all week and I keep the car in the garage when it rains while I work on it. But we need the rain badly so i'm not complaining. This will be my first use a gravity feed type gun. Yeah I was wondering about certain situations green1, thanks for the heads up. The only quality gun I own is my Binks touch up gun. All the rest have been crap and I have had good results. It all come's down to your technique and skills. I'll keep ya's posted.
Click to expand...
Harbor freight, 2 guns, up to 1.4. they worked great, I bought them as throw-aways, but am going to keep them. $60. Buy a swivel for air inlet. That cup and the hose get in the way when crawling around in a roll cage.
And, if you are crawling, after you get the gun adjusted outside; tape the knob adjustments- you bump them and move them too easy.
 
blackace said:
I got a coupon from Harbor Freight for a gravity feed gun. I think its about $10.

They are great for spraying chassis parts and the like, I love em. But I wouldn't use them for spraying color though.
Click to expand...

Wow that's a deal. I'm going to get a chance to use mine today, I pulled my dash and I will shoot the rear upper panels and insides of the doors.
 
Mine had 2 adjust knobs in the back, and the air control under. I painted at 8pm, with bad lighting, and crawling all over the place. Hit some knobs, couldn't see good.
But it still came out pretty good.
Nason- sealer, then topcoat, then clear; all within 12 hours. Whipped my ***.
Pot life 4 hours.
 
You must log in or register to reply here.
-

Back
Top