Recent content by 1967formulaS

Thanks guys, Got it sorted. ended up using the lokar universal throttle cable.

Cheers guys, Found this to suit mopar style cable.

Got bored and swapped out the 850 vec sec to this old school dominator I had sitting around. The fresh motor loves it. :) Now just figuring out if I need to: 1. Longer throttle cable and the mancini xtra tall bracket and return springs or 2. One of those universal all in 1 that bolts to the...

Hi guys. I currently have 275/60r15 Bf Goodrich on the rear and have been given a set of 28x10.5-15 M/T sportsman pro's. The Bf's just fit, with about 1/2 an inch of clearance from the leaf spring. Just wondering if anyone has tried this tyre and if they will fit.

What engine, trans and diff were you using? Tyre size?

I'm running the 383 closed chamber heads all rebuilt with some port work done. Lunati solid cam, lifters and matching springs. 1.6 roller rockers. Edelbrock Victor 440 intake and currently an 850 Holley but have an old 1050 that I want to try. Might be ok with this big thing on the street...

And all steel. :)

Thanks guys. I've been away interstate picking up a mates hotrod. 29 model a with an early hemi in it. Schweeet.

Lol, Yep they are going. Was like that when I bought it. I hate it.

Hi guys, Well I'm just about ready to start spending some more $$ on my barracuda. My aim is to get a consistent mid 10's Street and strip car, but I want to keep it period looking, with the exception of shocks and tyres. A couple of my mates have just completed drag challenge down here is...

Thanks mate, If you could pm me a price on the kit including a shipping cost to Adelaide, south Australia 5013, that would be great. I think I'll just get one of your kits, just in case.. :)

100% sure. :)

Hi guys, I'm using 383 closed chamber heads. The motor is a fresh build. Icon pistons, H beam rods, coyles timing chain kit etc. The heads were all built for that cam. New springs retainers, locks, valves etc all new. It took me a couple of weeks and some machining to get the rockers...

Hi guys, Yep, sorry was a typo. As suggested above. Heads and bottom end ran fine with a hydraulic setup. The heads have been rebuilt by a shop with new everything to suit the cam. I have 5/16 pushrods and I have 2 threads showing under the rocker on the adjuster screw.

Hi there, I spent a fair bit of time getting these to fit correctly. At first, they sounded a little noisy, kinda like an overgrown sewing machine. Readjusted and not as bad. Gave it a good test out, you know 5500 rpm gear changes etc and that's when the #8 intake pushrod jumped out and...