I do have ARP head studs...
I believe i have a HV oil pump... when i crank the engine over with no spark plugs or fuel in it, and valve covers off. oil starts dripping off the top of the valve springs and i had to grab some rags before it makes a mess...
The guy i bought the new shafts from...
here is my thread if you want to glance at it. https://www.forabodiesonly.com/mopar/threads/273-rocker-arm-adjustment.385140/page-5#post-1972620167
thanks!
Steve
Hello B3RE! Some of the guys here on FABO referred me to you because you sell geometry correct kits for my application. I have a 340 with 273 rocker arms and i am having some issues with galling on the rocker shafts and the push rods touching the pass through holes on the head. I have been...
getting ready to go to the Silverwood Coaster Classic Car show this labor day weekend in Athol, ID
Its disheartening to think that i only get to take this car out once a year...anyway here is an update with bad news...
i took the rocker shafts off to see how they were doing and they are...
yeah i have about 11"-11-1/2" from inside of quarter lip to leaf spring. the tires actually measure about 9-7/8" wide. so im good on side to side clearance. where the tires hit was the front of the quarter panel, which i think was from all the movement in the spaghetti like suspension. I think i...
i went from the stock 5 on 4 215/60R14 to 5 on 4.5 255/60R15 Mickey Thompson E.T Street S/S tires with US Wheel 15x7 with 4.5 back space. I got the bigger axles and green bearings from diff doctor. its the biggest wheel and tire combination i could find that fit the car with out tubing or...
Yeah it's pretty much stock setup. And good point about the springs and shocks they could be wore out. The plan is mostly street, occasionally strip. Around 300 hp.
What are you guys using to keep your rear end suspension from hopping and moving around.
i just put bigger rims and tires on.
I down shifted the other day got a violent reaction from the rear axle, got a enough movement in the leaf spring that the tires touched the body and bend some sheet...
https://s3.amazonaws.com/pageturnpro2.com/Publications/201407/3154/56617/PDF/130487993789071126_CARDONE%20Automotive%20Master%20Cylinder%20ID%20Guide_MCID14.pdf here is the web link to the PDF that jazk5 provided, which is awesome by the way
Here are pictures of the master cylinder that showed...
i think they might have mis packaged? because i ordered a 10-1515 and what showed up was what looks like 10-1516.... online stores need to have ACTUAL pictures of their dang products
looking for some 90/10 shocks that will fit my 1970 dodge dart.
I ordered a set on summit racing, and when they showed up they were wrong. Even though the picture was promising and the application was correct.
Here is some pictures, the white shocks are the originals, and the red ones were the...
Can you guys identify what year make model this brake master cylinder comes from?
see attached pictures.
My 1970 dodge dart, i believe was converted to disc brakes in the front by the previous owner.
Thanks
So i am rebuilding a 8-3/4" that came in my car. i think the original owner broke it, and when it got fixed it wasn't setup correctly. had almost no backlash so the differential would make a horrible noise when cruising. so i got a master rebuild kit with new ring and pinion and crush sleeve...