I haven’t stopped doing research and trying to figure out the best combo for me. Seriously thank you has been a giant eye opener. Tbh I’m not sure yet what I’m going to do I thought best I contact a & an about my 904 is a good start. You got a young hot rodder back into his hot rod.
Thank you so much, this was extremely helpful I understand it now. The first gear launch is the reason I have no problem driving it in town, the smiles per gallon are real. I’ve been trying to convince myself not to build a 360 magnum. You just convinced me. What would you recommend I do...
Hey I have a 1966 Plymouth barracuda 318/904 with 4.10’s(or 4.11’s) it’s a factory floor shifter. My question is what all options do I have for a 4 speed automatic transmission? I want to keep the stock gear shifter.(is this even possible?) I don’t have a big budget nor want to swap to a manual...
I just bought used upper control arms, spindles, rotors, calipers, hard lines and soft to swap my 66 barracuda to disc. I was not given bolts for the lower control arm with the ball joint or the lower control arm with the ball joint. My old 9in drum lower ball joint lined up to the threads. My...
Thank you Teflon tape fixed it but now my rpm goes up when I apply the brake sounds like a vacuum leak hoses a good start? Have you read about people rebuilding the brake booster?
Cars a 1966 Plymouth barracuda. Put on a new master just go get it going around town. The bolt under the master leaks I’ve tightening it maybe one whole more turn. It’s tight but out the box leaks?
Greetings from San Diego I’m new to the forum so figured introduce myself. I fix Honda’s for a living. I’ve had my 66 Plymouth barracuda for 4 years now. I recently pushed myself to finish the car. I just finished my bro’s 72 240z. Which brings me to why I’m here I’m hoping to meet people...
I’ve been trying to research the 66 barracuda you’ve been helpful for others I have a few questions I was wondering if you could answer.
1 what’s all involved with removing the ignition cylinder?
2 what’s involved with replacing the heater core?
3 have you read any complications with...