Hello Rapid Robert,
Use a fluid that has extreme high pressure capabilities and has an clinging additives for circle track racing.
There are several brands to choose from.
Hope this helps....
Happy Mopar :)
Arron.
Hello flathead31coupe,
Is this what you are looking for?
I would not pay that much unless you really want one..
They pop up on here from time to time for much less.
Be carfull if you buy one because there are car ones and truck ones (Keyed spline and non keyed spline).
Happy Mopar :)
Arron.
Hello dddDuster.
I have some on a shelf at the shop.
I can look at them for condition and let you know that I got...
Remind me if i dont get back to you in a timely manner (stuck here with a sick friend)
Happy Mopar :)
Arron.
Hello Oldmanmopar,
Were you able to find the Drivers side tinted glass for a 73 duster?
Will be at Carlisle on Thursday AM...
Thanks in advance
Happy Mopar :)
Arron.
Hello baracus,
I use Reliable carriers and or Plycon for most of my transport needs.
Keep in mind that a lot of other carriers are just brokers and your car may change hands several times when going from point A to Point B.
Stay with a well known carrier.
You get what you pay for...
Hello Wvbuzzmaster
Short version.
Wire the pump up using a Relay (4 or 5 pin type).
You can trigger the relay off the run side of the ignition switch and power the relay (pump) directly off the battery.
Hope this helps.
Happy Mopar :)
Arron.
Hello jos51700
FYI
As noted in My reply the Picture and screen grab was "for info only" and I Noted "You will need to find the correct one for your application"
And as a Note... Most ball joints have a Teflon insert inside that the Ball rides on. Any type of Welding "Tack Weld" to the ball...