Recent content by bakertodd

  1. bakertodd

    aluminum heads

    I have a set of standard 440 Stealths purchased bare. Had Hughes prep them w/ valve job, milled them to 75cc`s and I finished the port work myself - @ $2,000 all in all. Going with a Comp cam kit w/ springs, locks, retainers etc. As long as I get the cam, intake setup, and tuning right my `74...
  2. bakertodd

    [WANTED] 489 casing 8 3/4 inch 3.91 pumpkin

    I`m in southeastern MA. Excellent to very good condition only. Thanks
  3. bakertodd

    big block cooling

    Have a 26 inch Griffin rad w/ 2 Permacool thin profile fans in a custom shroud in my BB Duster and still have some cooling issues sitting in traffic but no clearance problems....Planning to go w/ a Mancini high volume water pump; stock pump in it now. Look into the 10 blade higher CFM fans from...
  4. bakertodd

    Big Block fenderwell headers? Proparts?

    Have ProParts on my Duster and love them; slight steering clearance issue just had to dimple one tube.....
  5. bakertodd

    Need big block help.

    I have a `74 cast crank low comp 440 in my Duster (Shumacher engine mounts). Here`s what`s been done and the plan moving forward: .030 overbore with Mopar Performance piston kit, ProParts partial fenderwell headers, MSD ignition, Griffin 29 inch radiator w/ dual fans. Plan: Have a set of 440...
  6. bakertodd

    Worked over 440 motor home engine hp question?

    Doing a similar top end build on my `74 low comp .030 bore basically stock bottom end in good shape. Have a set of bare 440 Source heads at Hughes getting prep and milling should end up close to 10:1 w/ Felpro gaskets. Have Proparts headers, Eddy RPM intake, Holley 750 2x pumper, MSD, planning...
  7. 1971 Plymouth Duster

    1971 Plymouth Duster

  8. 1971 Plymouth Duster

    1971 Plymouth Duster

  9. 1971 Plymouth Duster

    1971 Plymouth Duster

  10. bakertodd

    Spark plug clearance Eddy RPM/Proparts?

    Close to buying a pair of Eddy RPM Performer 75cc heads for my 9:1 comp 440 Duster w/ Proparts headers from Bob Mazzolini. I`ve heard there may be spark plug clearance issues with this combo. Any opinions/experiences/suggestions? Thanks in advance.....
  11. bakertodd

    Paxton, Torqstorm, or ?

    Any opinions/experiences/observations re: centrifugal or billet style superchargers for low comp 440 RB engines? Looking to ad some power to my `71 Duster with a `74 smog motor.
  12. bakertodd

    Paxton, Torqstorm, or ?

    Any opinions/experiences/observations re: centrifugal or billet style superchargers for low comp 440 RB engines? Looking to ad some power to my `71 Duster with a `74 smog motor.
  13. bakertodd

    Opinions on this radiator/fan setup?

    What does the FABO brain trust think about a 22" Griffin universal fit aluminum unit w/ a 16" Flexalite 2,500 elec. fan to cool a modest 440 (cast crank, 9:1 comp, .030 over rebuild; doubt it will ever exceed 500 hp)? If the downflow unit would be insufficient I could spring for the crossflow...
  14. bakertodd

    Griffin Radiators?

    Planning to upgrade my stock 22" small block radiator. `71 Duster w/ 9:1 comp 440 .030 over rebuild. Looking at a Griffin 26" Dominator w 2 10" Summit Racing elec. fans. Opinions? Thanks in advance!
  15. bakertodd

    Hi Moper, Starting to put together a plan (several plan options really) for my motor. Would like...

    Hi Moper, Starting to put together a plan (several plan options really) for my motor. Would like to talk to you about services you provide an/or recomendations you may have. Head work etc....My cell phone number is 781 718 8138. Thanks, Todd
Back
Top