Recent content by BHB4408

Thank you all for your replies. I will follow your advice. Merry Christmas,

Sorry, forgot to mention stall maybe at 4800. I haven't purchased the converter yet, so advice on that is appreciated too.

Help with Cam Selection on 440 Dart? I have a race only 72 Dodge Dart, 3200 lbs with driver. I am building a 40 Over 440 with a 512 Stroker Rotating Assembly from 440 Source including their lightweight crankshaft, Trickflow 270 Heads, 10.8 Compression, Max Wedge Super Victor Manifold...

Any advice would be appreciated. I'm building a 1972 Dodge Dart that will have a 525 - 550 HP 440 and 727 Transmission when it's completed. Frame ties and 8-point roll bar is done. It has Mini-Tubs and a Narrowed Rear End. It'll run 28 x 10.5 Slicks. I have the 002 and 003 Super Stock Leaf...

Thank you 33IMP; The 8 point simple roll cage has already been built, and I have good subframe connectors welded in. Maybe I jumped the gun a little. You are the third person with the same opinion on TCI. Nice to know. Cope is near me here, so I'll start with them. Glad you said the 727 is...

Thank you for the replies; I'm starting with a 489 8.75 because that's what I have for now. I'll move to the Dana as soon as I can after I get it built. I won't use a Trans Break until I do. The car will end up at about 3,000 pounds with the 440 and everything I've done. The 440, when...

New to this site. I'm 60 years old and have had many Mopar's in my life. I drag raced through my 20's and 30's in a 1969 Dart that ran mid 11's. I also ran two other Dodge's that were a bit slower. Most recently, I Drag Raced an 11.8 second (best time) 2010 Camaro SS for the past four years...