Big Dee's latest activity

  • B
    Big Dee reacted to George Jets's post in the thread Why do the ignition boxes fail? with
    Like
    Like
    .
    10 - 4 Aluminum Heat sink HEI Mopar bracket installed with the proper Thermal Paste. Can buy the thermal paste at your local Best Buy...
  • B
    Big Dee reacted to George Jets's post in the thread Why do the ignition boxes fail? with
    Like
    Like
    .
    Of course you need the Straight 12 volt wired E-Coil To burn the plugs clean > NGK 4 V-Power, for small blocks. ☆☆☆☆☆
  • B
    Big Dee reacted to Robzilla's post in the thread Blue Print Hemi with
    Like
    Like
    .
    Thanks Dee... my buddy lives 100 miles from me. I'm gonna swing by his place next weekend to check on his progress/motivate him!
  • B
    Big Dee replied to the thread Blue Print Hemi.
    That’s bad ***.
  • B
    Big Dee reacted to Robzilla's post in the thread Blue Print Hemi with
    Like
    Like
    .
    I have purchased the complete 426 hemi set-up from Blueprint (engine management, fuel injection and accessories). It's going into a 71...
  • B
    Big Dee replied to the thread Blue Print Hemi.
    I agree with the idea of overdrive transmission and fuel injection. it makes the car more drivable than anything else probably Lots to...
  • B
    Big Dee reacted to DionR's post in the thread Blue Print Hemi with
    Like
    Like
    .
    To me, I don't care what motor you run, I think an OD is a must. I run an A833OD behind my hybrid LA with a carb for that very reason...
  • B
    Big Dee reacted to DionR's post in the thread Blue Print Hemi with
    Like
    Like
    .
    I'm not aware of anyone that has run a BP motor in their swap. But I don't see that it makes much difference where the motor came from...
  • B
    Big Dee reacted to dano's post in the thread Blue Print Hemi with
    Like
    Like
    .
    Might have to open a few piggys! I feel the same way about some newer cars, but I can work on the GTS, new stuff gets overly complicated...
  • B
    Big Dee reacted to DionR's post in the thread Blue Print Hemi with
    Like
    Like
    .
    Just to follow up, the AC compressor mount is custom for the TTI mounts. The DS mount use the same bosses so you have to do something...
  • B
    Big Dee reacted to DionR's post in the thread Blue Print Hemi with
    Like
    Like
    .
    Looks like the fully dressed BP engines with EFI come with a Holley Terminator setup included. So that part might kind of be taken care...
  • B
    Big Dee replied to the thread Blue Print Hemi.
    Thanks for summing it up. the blue print comes with a computer as far as I know, I have to replace fuel tank and will get one that has...
  • B
    Big Dee reacted to 66Dartdriver's post in the thread Blue Print Hemi with
    Like
    Like
    .
    You say the car has been sitting a long so what are your goals here. Get it back on the road quick then get your 340 going. Next choice...
  • B
    Big Dee replied to the thread Blue Print Hemi.
    Car was a 318 car. I put the 340 in it 35 years ago. I got the car in high school and would like to make it fun again. we get spoiled...
  • B
    Big Dee reacted to dano's post in the thread Blue Print Hemi with
    Agree
    Agree
    .
    That I can't argue with that especially if you live in a large urban area and shop costs are high. If my 340 ate it, I'd probably go...
Show older items
Back
Top Bottom