Recent content by blk00rt

thank you that is what I was hoping to hear.

something doesn't seem right to me. I have a magnum motor, stock compression, Eddie heads, RPM intake, 1.6 rockers, small cam .482/.496 duration 214/220 with a lsa 112. The cam is ground for 1.6 rockers. Timing is at 14 degrees at idle, i am idling around 1000 rpms, carb is a csu (holley based...

the two that I have never heard anything bad about is Brian at IMM engines and Flying Ryan at FRP. Ryan is more of a tuner but he has shops that he deals with for engine builds.

The forum monitors must have took it down then I remember a couple of threads on there where PIE was cutting peoples frames to get headers to fit and not boxing it back in. Their tunes were only close enough to get a truck running and then they had to be tuned by someone else. Are you on the...

if you do not have the PIE top end kit yet, I would recommend you read up on them. Some have had decent luck with them but some have said some very bad things about them. I have never dealt with them but I have heard of them in the Dakota RT community.

i used the painless, the steering column wiring schematic was the hardest part of getting it right. I wound up getting and I didit column during the wiring process and that made it a lot easier... the only reason why I did the I didit column was mine was one of the model cars they used to...

I had one like that at one time. I had to trim the bottom of the L portion that bolts to the head off. The parts that stick out was crashing into the fire wall. It also can be a tight fit if you are putting the bolts on the back of the heads.

Agree Rick does good work. He has helped me and many others with their mopars.

payment pending on the covers.

if you check legendarys website, they list the shows that they go to. Sometimes they offer discounts if you order you covers at the show..I think I saved like 25 or 30% off on my seats.

sold pending payment

moparmike, you are second in line if 44067gtdart turns them down.

moparfourever, I cleaned up my inbox and you are third in line

I was going to reply in a pm but your inbox is full. It looks like ups is showing 30 dollars. so that plus the 75 dollar for the parts and then 3% pay pal fees. looks like $ 108.15 total

pm replied to