Recent content by Burista

  1. Burista

    [WANTED] 70' Dart Swinger LH drip rail trim

    Went for a drive today and by the time I got home my driver side drip rail trim was no where to be found. Wanted to see if anyone had the lefthand side only for sale before I dropped $300 on both sides. Looking for the long piece only.
  2. Burista

    [Found!] Front Valance - 70-72 Dart; 71-72 Demon

    Looking for a front valance for a 70-72 dart or 71-72 demon in good condition (no major dents or rust holes). Must be local to Las Vegas or Reno area or willing to ship.
  3. Burista

    Full Repaint Question

    It's been a couple of months since I've done a right up on this post but I figured now is a good time to give yall an update. First off, most of the estimates yall gave were spot on, 10k+ for a quality job, and $500-$3000 for a budget job (really no in between), after that I pretty much wrote...
  4. Burista

    Full Repaint Question

    Thanks for everyone's response so far. As much as I'd like to hear it not cost that much I appreciate real-world input on this so I know what I'm getting into.
  5. Burista

    Full Repaint Question

    Lol, I only asked because I've heard such a large range in prices on the internet, I have a good amount saved up and I've put so much time and money into the rest of the car that I don't want to cheap out now. I'm on spring break so I'm planning on going around and getting quotes but if I'm...
  6. Burista

    Full Repaint Question

    I should add that it needs virtually no body work, the car is super solid, and that it wouldn't be a color change, just a repaint of the stock color.
  7. Burista

    Full Repaint Question

    The time has come that my dart is ready to be painted. I'm in college so I don't have the time or space, or skill right now to do it myself. I'm aware that every shop is different and that cost generally depends on the quality but can anyone shed light on what I should expect to pay for a full...
  8. Burista

    [WANTED] Short Box Dodge Wanted, Las Vegas (Surrounding)

    Just testing the waters here but looking for a single cab, short bed D-100 or D-150, 4-speed truck. I want a relatively solid project, does not need to be running. I'm pretty open to anything so just message with what you have. Located in Las Vegas but willing to drive.
  9. Burista

    8 3/4 Issues

    Thanks, I bought the car 3 years ago when I was 16 and the project didn't really get rolling until quarantine happened, so basically, everything I've done has been my first time doing it and these past months have been filled with trial and error, I'm torn right now between tearing it down again...
  10. Burista

    8 3/4 Issues

    I purchased a complete sure grip 3rd member, 741 case, it had a set of 3.23s in it so I decided to take it apart and put 3.55s in it instead, this was my first time ever doing anything with a rear-end so it took me some time, once it was reassembled the lash was somewhat questionable but I...
  11. Burista

    [Found!] 10inch drum Dart swinger front hubs

    New to the forum and not sure how to pm, but I’m interested.
  12. Burista

    [Found!] 10inch drum Dart swinger front hubs

    I need the front hubs for my 70 dart swinger with 10 inch drums, both driver and passenger side, thanks.
  13. Burista

    [Found!] 1970 Dart Swinger Radio/Climate bezel

    Hello, Apologies if the format of this wanted ad is wrong, this is my first time ever posting on FABO. The previous owner of my dart butchered the original hole for the radio and the bezel with it. I'm looking for a bezel for an AC car (push button) as shown below, I would like a silver one but...
Back
Top