Recent content by coair73x

  1. coair73x

    [SOLD] 1970 Duster 340 4spd

    inbox is cleared and I am willing to take some offers. I have lots of tools I will not need anymore and engine hoist and transmission jack etc I want to go with everything. So definitely going to need to be close to DC area and have a trailer and box truck most likely.
  2. coair73x

    [SOLD] 1970 Duster 340 4spd

    My father bought this new in 1970 and it has been with me since 1991. I have mostly everything original for it except the bench seat. Currently has a bench seat out of a 70 Dart Swinger. The car currently has a 360 I had built in it in 1991 and still runs strong . 727 and has 430s . I have the...
  3. coair73x

    [SOLD] Line Lock

    I was thinking the same. I saw something similar on Summit.
  4. coair73x

    [SOLD] 5 Thermoquads

    5 Thermoquads. Only one is complete. Complete is 6460s 74 440 auto The rest all open but are missing screws etc rods etc. 9272s 79 360 Truck 9336s ?? Not listed but assume 318 or 360 car very clean carb 9112s 78 440 HP 5th does not have numbers that can be read. These have been stored since...
  5. coair73x

    [SOLD] A-BODY 8 3/4 rearend

    I assume this 8 3/4 rearend has been shortened from a B-Body. Includes shortened B-BODY Axels with Long Stud 4.5 bolt pattern. (One spline is not straight) Includes 741 3.23 Sure grip and 741 2.76 open that needs yoke. Complete package will not separate Local pickup only No Shipping Located...
  6. coair73x

    727 noise from Reverse to Neutral and 3rd to Neutral when cold.

    It is more of a loud buzzing then a grinding. Once Fluid is warmed up I don`t notice it.
  7. coair73x

    Aluminum Radiator

    For now I have no plans to. I am either going to have my original cleaned when I change the antifreeze or try the ECP and put a new water pump on. Car runs plenty cool in fall and spring. I would prefer the car to run 180 or so in summer months.
  8. coair73x

    Aluminum Radiator

    That is nice to know. I think I will wait till winter to jump into this job. I hope to see some photos of the ecp 22 inch in some cars with original shroud.
  9. coair73x

    Aluminum Radiator

    grinding on the radiator its self or radiator support? I have a numbers matching 1970 Duster 340 4 speed so not interested in drilling radiator support. The adapter bushing? Is it needed for all hoses? I have a mild built 40 over 360 in the car now with a 727. I had it out today in 95 degree...
  10. coair73x

    727 noise from Reverse to Neutral and 3rd to Neutral when cold.

    I recently had a 727 built with a Manual FWD TCI VB and I get a light grinding noise when putting into N from reverse. This is right after I start car and transmission is not warmed up. There is no noise when it is at operating temperature 100 to 150. It shifts great. Also noticed when I first...
  11. coair73x

    questions about carb spacer?

    I have this carb spacer I picked up someplace years ago. It looks like a velocity spacer but thinner. Anybody seen or have one?
  12. coair73x

    Aluminum Radiator

    This is sounding like less of a direct bolt in Radiator.
  13. coair73x

    [SOLD] K&N Stub Stack for Holley 4150

    Used K&N 85-0200 Stubstack Air Horn I had on a Holley 750 Vac Secondary. $35 plus shipping. Located in Annandale, Virginia
  14. coair73x

    Aluminum Radiator

    that is good to know. I don`t want to have to do alot of rigging to get it to fit though.
  15. coair73x

    [SOLD] Line Lock

    Line Lock that I bought 15 years ago and never installed it. I have no idea the brand. It includes instructions. $75 plus shipping. Located in Annandale, Virginia.
Back
Top