Recent content by CUDA69

Drum brakes with a Disk / Drum MC will do that.

Another thing to consider is tinting the windows. Sun shining through untinted glass will over whelm the A/C.

Vipers had a V10, LOL.

Lots of room for improvement. I will be at Island Dragway Sunday for their Mopar Race.

The Cuda is a street car. I can pull 1.1 g on the turns, the Tesla is pulling 1.6 and has a much better driver. He is typically 20% faster on the lap times. He has 16 inch carbon fiber rotors, mine are 11" steel, 500 HP vs 430, and a lot of computer help vs an inexperienced Grandpa, LOL.

Went last June, had 8 sessions, tons of fun. Two hours of total track time was great. Everybody else dropped out by the last session, so it was just me and my son. He followed the Cuda for a lap at 7:15, 11:30 and 16:00 minutes on the video. He is driving a Tesla 3 set up for the track...

I found the EBC yellow brake pads grab a lot better than the typical street pads. They work on the street while cold but are good on the track when hot.

The Eaton Trutrak is whole lot better for putting power down while turning. You don't spin out. Talk to Dr. Diff.

Move them all the way in. With the pivot moved in you gain more camber as the wheel goes up during hard cornering.

Front and back look like some of the Australian cars.

They are available new.

Talk to Firm Feel, they have every thing you will need.

There is an Engine Masters episode with Steve Dulcich's blown 225. It is available on the Motor Trend streaming service. It worked well but needed an upgraded head gasket.

There is a 5 volt regulator attached the back of the fuel gauge. It supplies the power to all of the gauges. The OEM version has points and can act up. That combined with a grounding problem can make strange things happen like this. It's easy to check the grounds under the hood first. The...

I just finished chasing the same kind of leak. After doing all the easy stuff it turned out to be the china wall. Put in a new intake manifold gasket and sealed the front and back really well and finally it stopped leaking oil.