CudaFactHackJob's Recent Activity

  1. CudaFactHackJob replied to the thread 727 Tail Swap.

    If you feel this website wobbling, it's from all the old tranny guys shaking their heads in unison..

    Dec 4, 2020 at 8:10 PM
  2. CudaFactHackJob replied to the thread 727 Tail Swap.

    It's easier to install that 400 than it is to rebuild an automatic.

    Dec 4, 2020 at 7:58 PM
  3. CudaFactHackJob replied to the thread 727 Tail Swap.

    All my cars are gonna outlive me..so i always go bb anymore for the extra resale value.

    Dec 4, 2020 at 7:35 PM
  4. CudaFactHackJob replied to the thread 727 Tail Swap.

    Put a set of Edelbrock heads on that 400 to jack the compression and breathe like a mofo. Who had a 383 Magnum Roadrunner back in the...

    Dec 4, 2020 at 6:04 PM
  5. CudaFactHackJob replied to the thread 727 Tail Swap.

    I think the 318 puts out more power than the 400. 400 needs some old 361 heads on it for a compression boost.

    Dec 4, 2020 at 5:24 PM
  6. CudaFactHackJob replied to the thread 727 Tail Swap.

    Don't put all your faith in a book or video. One little problem overlooked cuz it ain't in the book...and it has to come back out. Just...

    Dec 4, 2020 at 5:08 PM
  7. CudaFactHackJob replied to the thread 727 Tail Swap.

    It's extremely complicated. But there are over a hundred old fools on here with more time than money and any one of them can advise you...

    Dec 4, 2020 at 2:24 PM
  8. CudaFactHackJob replied to the thread 727 Tail Swap.

    Just buy a seal up kit off ebay for $25.45 free shipping, but you'll need a special rear seal and a better pan gasket like $6.05 for red...

    Dec 3, 2020 at 11:19 PM
  9. CudaFactHackJob replied to the thread Lancer trans.

    And I see the fiber gasket for 6.05 free ship..Don't use a cork or rubber or neoprene pan gasket. Red or black fiber only.

    Dec 3, 2020 at 11:11 PM
  10. CudaFactHackJob replied to the thread Lancer trans.

    I think the closest Transtar is in Charlotte.. There's a seal up kit on ebay for $20.85..Free shipping..

    Dec 3, 2020 at 11:08 PM
  11. CudaFactHackJob replied to the thread 727 Tail Swap.

    NO. Use the gears from the short one. To simplify, when you take the trans apart,and get back to the clip on the front of the output...

    Dec 3, 2020 at 10:52 AM
  12. CudaFactHackJob replied to the thread Lancer trans.

    Type F has a microscopic abrasive that makes the valves in a Ford self-cleaning. It's needed because Ford didn't use filters; only...

    Dec 3, 2020 at 10:44 AM
  13. CudaFactHackJob replied to the thread Lancer trans.

    What city do you live in? There are transmission supply stores all over the place.

    Dec 3, 2020 at 1:35 AM
  14. CudaFactHackJob replied to the thread 727 Tail Swap.

    I always keep the front planetary gearset with the output shaft it originated on. There are two different sets of splines; and they are...

    Dec 3, 2020 at 1:32 AM
  15. CudaFactHackJob replied to the thread Stall?.

    I ran the Vega converters from the th350 transs; in camaros and chevelles...way too high stall for the street in a heavier car like...

    Dec 2, 2020 at 4:43 PM
  1. This site uses cookies to help personalize content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.