Recent content by dazedduster

I have a bone stock 73 slant gold duster and it is small bolt pattern, I think some 73's made it out that way to use up old stock

Picked me some Cantrell's two weeks ago

First you need to specify what type of field, here in northern cali a standard (trench with gravel and pipe) for a 3 bedroom house 8k + or -, a high mound (Wisconsin mound) cost about double that, are they replacing the tank as well or just the field. if it is standard system sound way to high...

I have a rebuilt stock 78 440 out of a ramcharger in my 73 duster. I am thinking about putting a performer RPM manifold and a comp Cam and Lifters, Hydraulic Flat Tappet, Advertised Duration 268/280, Lift .477/.480, Mopar, Big Block, Kit in it. Is anyone running a similar set up and how does it...

I have a 73 duster with a 440 I want to put a Eddi performer RPM manifold I have on it but it a bit taller than the stock is any one running this combo or can someone verify if it will fit and still let the hood close

you said the carb was a year old did it sit for a while I just went thru this with my 440 fired it up after sitting went to drive it no power and backfired when you punched it, went crazy tuning things up finally decided the carb was all that was left borrowed a 750 problem solved carb was gummed up

just did mine 2 weeks ago got a adhesion promoter in rattle can then vinyl paint both from kragans looks really good and stuck well.

I am Assuming allen screw is on the bottom below the fuel pump

I have a 440 that does not have a fuel pump or the rod in it can the fuel pump pushrod be installed thru the hole the fuel pump goes in or what is the preceedure

You will need to change the coupler at the end, I just put a m/s in my power steering car and that is the only mod I had to make

Final update - the truck is still available i have been working with a few guys but no one has been able to make it happen. It is set to go to scrap monday, if you can get it before then it is yours if not it is gone. I also went to dmv it is on non op so no back fee's are due, it also had the...

i think responded to all pm's - sorry it took a day it was crazy yesterday found out after 15 years i will likely be unemployed after friday.

F.Y.I. my fort bragg in is north california and there is enough intret that it will be saves fro the crusher even if it takes another week

So as of now metallidart is going to see if he can get it shipped to ohio then the order goes sleeper oem, discharger 1332, and 68gt convert. I am glad this will find a home i had some questions so here are the answers it was a daily driver when parked the brakes on the front looked new...

1970 d200 big block 383 camper special long bed pick-up runs drives needs break work one owner. Haz a couple of small rust spots on the passenger door where the trim attaches interior is in great shape still has all 4 hub caps. It is a cool old truck could be a daily driver with very little...