Recent content by devilchicken

PM sent on the steering wheel

I did a rallye dash conversion on my 71 scamp and I used the wiring diagram from the 1971 Plymouth service manual and converted my non rallye harness, I also know that you can purchase a laminated version of the diagram from various vendors on the intrawebs

rack and pinon steering and header/exhaust clearance alone make any aftermarket coil over suspension worth it for me.

Yes I've bought several items from them, of the parts I have ordered they are of good overall quality and what I consider to be reasonably priced. It does take a bit longer to receive your ordered parts due to them being In Canada but its not too bad.

Dodge Adapters | Procar by SCAT | Custom Seating Solutions These are what I used to put buckets in my 71 scamp and the seat mounts lined up with the dimples in the floor for the factory bucket seat tracks https://procarbyscat.com/product/rally-smoothback/ And here are the seats I went with...

Rock auto has them look for spark plug tube seal

For what its worth I put a set of seats in my 71 Scamp and Procars seat brackets lined up with the dimples in the floor pan well and overall there was no problems for me, I don't know for certain but I cant imagine that the floor pans changed that much from 69 Barracuda to 71 Scamp.

Yes all four tires are 245s and yes the wheels are the cast versions and have a custom backspacing

17 x 8 with 4 7/8 backspace and 245/45/17 BF Goodrich sport comp tires. If possible I recommend the use of a tire and wheel simulator to insure proper fitment/ back spacing in your wheel wells before you order.

Autometer sport-comp Oil and water temp gauges for sale The good: perfect working order includes proper Autometer sensors The Bad: both gauge bezels are dented near the bottom (not from me I bought them that way) water gauge mounting stud broke off from the body and I used aviation...

Yes

there should be four pieces total two are glued to the inside of the kick panels (not in your pic) and they will be cut in roughly the same shape of the kick panels and the other two pictured go on the car side, they are glued above where the kick panels live with the black fiberboard side to...

I got one out of a 71 Scamp I just sent you a PM

Take a look at ET wheels ET Wheels by Team III Wheels they are a simliar design and they have a large selection of sizes

I got a nice original one with a repop washer bottle