Recent content by dewsky

  1. dewsky

    Bouncing ammeter

    It’s pretty rhythmic.
  2. dewsky

    Bouncing ammeter

    Ok guys....I installed a Sniper EFI on my 360. Got her running and now when it's running the ammeter is bouncing from nothing (middle) to full right and back and forth. when first started it was not doing this but started after a few minutes. I have disconnected the ballast resistor from the...
  3. dewsky

    Fuse Usage

    Would love a copy of the operators manual though…..
  4. dewsky

    Fuse Usage

    Thanks Guys....that would explain it....car was an original /6 with A/C....but the A/C compressor and lines have been removed. So, it appears to be an open circuit for me to use. That will work for me.
  5. dewsky

    Fuse Usage

    Ok Guys.....here it goes....Photo one....LH Side (switched)....What does Fuse #3 go to? According to the 1975 Mopar wiring diagrams, and the wiring diagram from Classic Wiring, this fuse should be not going anywhere....BUT, when I look at the back of the fuse panel (photo 2), this fuse has a...
  6. dewsky

    Brackets....

    THAT makes sense.....Thanks
  7. dewsky

    Brackets....

    Ok guys.... I was under my 75 Duster and found these Brackets (one on each side) that are located just above the fwd mount bolt for the Rear Spring. Any idea what these are for?
  8. dewsky

    Sniper EFI Temperature Sending unit

    Do you have photos? I am also thinking of putting a 1 inch spacer between the sniper and the manifold.
  9. dewsky

    Sniper EFI Temperature Sending unit

    Do you have a link for that Housing?
  10. dewsky

    Sniper EFI Temperature Sending unit

    Hey there guys.....Got my Sniper EFI and starting to do the install. I have an Edelbrock AIR GAP intake, but CAN YOU GUESS.....the GM style Temp sending unit is too big for the two holes that I can use. Anybody else figure out how to hook this up? Says that the sending unit needs to be in the...
  11. dewsky

    USCT Crossmember for 518

    WOW>....That's so cool of you to post that info!! I am sure that there are a lot of folks who will be looking at this, as I had as well. I Did some checking on my current setup(remember that I did not build the drivetrain) and found that it has an A833 from 1976 and it has Overdrive already...
  12. dewsky

    [SOLD] A518 46RH Transmission

    Ad changed to include location
  13. dewsky

    [SOLD] A518 46RH Transmission

    This is a 46RH A518 that came out of a 93 Dodge Dakota. Transmission is complete from torque converter to output shaft. This is the Hydraulic overdrive that does not need a computer to engage or control the shifting. I decided to go another direction, so I dont need this item. LOCAL PICKUP...
  14. dewsky

    Seat Track Conversion?

    Ya know.....I've not tried it yet....but sounds like a good idea. Will let you know how it works out.
  15. dewsky

    Seat Track Conversion?

    Well, shucks.....sounds like it will be easier to just find the missing track. And they are such a pain to find........
Back
Top