Recent content by Dohc Rocks

  1. Dohc Rocks

    Measurement request - Duster taillight panel

    That's just the shape of the flange. It's an AMD piece FWIW.
  2. Dohc Rocks

    Measurement request - Duster taillight panel

    @DFX 340 Duster, thanks so much for the confirmation. The tail panel was installed at a height of 13.25 and I was beating my head off the wall trying to figure out why the trunk gutter was 1/4 - 5/16" too low to properly mate up with the quarter panel when the quarter was properly seated to the...
  3. Dohc Rocks

    Measurement request - Duster taillight panel

    I'm in the process of completing a resto on a 70 Duster that was started by a previous owner. I've replaced the trunk floor pan and am ready to reinstall the original tail light panel. Can I get a measurement of the distances from the trunk floor to the top of the tail light panel at the...
  4. Dohc Rocks

    Black Friday sales. Who’s buying what.

    Promaxx beasts them from .100 - .400 and they kinda meet up at .500 at around 250 cfm. Promaxx advertises 5 angle valve job (are the intake's backcut?) vs PW's 3 angle. I wonder if this is the factor that's killing the mid lift flow? Either way, I just ordered the ProMaxx 171s, $2446 CDN to...
  5. Dohc Rocks

    Black Friday sales. Who’s buying what.

    @1MeanA For the Canadians, Performance World has their PW heads for SBM for $2249 CAD ($250 off) until the end of the day. They look identical to the Promaxx 171s but claim a 179cc intake / 79 cc exhaust versus Promax's 171 intake / 77 exhaust. The PW's appear to be assembled with quality...
  6. Dohc Rocks

    Black Friday sales. Who’s buying what.

    $677.77 to ship to Red Deer :realcrazy:
  7. Dohc Rocks

    Black Friday sales. Who’s buying what.

    Much thanks to @73smallblock and @GTX JOHN and @halfafish !
  8. Dohc Rocks

    Black Friday sales. Who’s buying what.

    Anyone have a Summit Discount Code to share?
  9. Dohc Rocks

    Aluminum heads and 63 vs 65cc chambers

    All I want to know is if the Promaxx and Speedmaster 65 cc chambers are just a slightly larger closed chambers or an open chamber like the Edelbrock 65 cc chambers are. The pictures on the respective websites don't clarify this. Promaxx shows an LS combustion chamber which just adds to the...
  10. Dohc Rocks

    Aluminum heads and 63 vs 65cc chambers

    Are the 65cc combustion chambers on Speedmaster and Promaxx heads closed or open like on the Edelbrock 340 head? If they're both closed, is there any difference in the chamber design or is it more of a case of clever marketing of casting variations?
  11. Dohc Rocks

    Hotchkis rear sway bar install

    **UPDATE** The core issue is that the end link brackets are designed to fit on a flat surface and the area they need to go is the forward area of the frame's over-axle arch. The two options are to forgo two of the welds as per the instructions or modify the frame rails so the brackets sit flat...
  12. Dohc Rocks

    Which rear axle gaskets

    The rubber asbestos gasket was replaced for obvious reasons with the current dark foam gasket and the old white foam gasket was replaced with the modern embossed steel piece. That said, you can still buy the white foam gaskets from a few spots.
  13. Dohc Rocks

    Which rear axle gaskets

    There are two different gaskets: 1) Foam gasket, felpro # 13800 goes between the housing and the drum backing plate; and 2) Metal gasket, felpro # 55032 goes between the axle flange and drum backing plate. If you run the green bearings with the o-ring, you can omit the gaskets.
  14. Dohc Rocks

    Ever heard of "Speed & Performance" branded swap mounts?

    Solved. Street & Performance was a shop based out of Mena, Arizona. Facebook: Street & Performance Inc According to this site they are for E bodies and don't fit A bodies :-( The Kijiji ad that got me searching this in the first place... Hemi swap engine mounts | Engine & Engine Parts |...
  15. Dohc Rocks

    Ever heard of "Speed & Performance" branded swap mounts?

    I should clarify, they are supposed to be for dropping a 5.7 Hemi into a pre-73 A body. Just curious if anyone is familiar with the brand. I don't want to lay our $100 for mounts that don't fit worth a damn.
Back
Top