Recent content by fatazzchuck

AJ you're looking at old post and I already posted the guy sold the cam before you go carried away yesterday ... Can you focus on I'd like to find a Hydraulic Roller with .550 lift or less for my 5.2 Magnum and if not.. I have a 79 318LA that has this kit in it now...

Uuuuummmm? Did you see this post? I'd like to find a Hydraulic Roller with .550 lift or less for my 5.2 Magnum and if not.. I have a 79 318LA that has this kit in it now https://www.summitracing.com/parts/cca-k20-221-3/overview/make/dodge and I bought this Voodoo Hydraulic Flat Tappet...

ISO: Magnum cam no larger then .550 lift @ 1.6 rockers Running stock 5.2 Magnum with ported bowl heads, 3 angle valve job, .550 springs, Retainers, locks, stainless steel valves, hooker super comp fenderwell headers, dual stage airgap intake, 904 tranny, 3000 stall, 276 suregrip, P205/65R15...

The reason I asked was because I'm currently talking to a guy with heads, cam, and 3000 stall from his build they wasn't fast enough for him and at a great price fer me. Thanks I thought that was a flat tappet cam issue not a roller cam issue???

I know you're 110% right

I already bought from Ebay the knock off Assault dualplane air gap intake... No A/C, No P/S so it should work It's a bone stock 5.2, I'm thinking the stock springs will run the cam, I know it's best to replace but funds are limited like a fat lady squeezing a poot on a church bench, I expect the...

Hey guy's, I have a tech question about the p5249499 Magnum 360/380 hp crate motor with this roller cam .501/.513 lift with .230/.236 duration @.050 with a 108 lobe .. Are the heads on this motor plain stock heads? If not what's been done to them? I'm thinking of buying the heads/cam and...

I just pulled the Slant Six 170 motor and trans doing a V8 swap, the motor ran great and the car was showing 35k so it could be 135k ... I have a video of it running but don't know how to post it Located in Thomasville, NC $500. OBO

They where hanging on the guys garage wall from a project he didn't finish , they where bolted to the engine on a test stand and used to break the engine in and then put on the wall until I bought them,, their heavy and not beatup nor rotted out. Sure the paint came off in places, but it states...

"Price is Firm" $450 + Shipping I got a set of like New Hooker Super Competition Headers 5208HKR Fit 63-66 A-body Small Block I bought them 2 months ago for my 65 Dart , was told they were used to brake motor on engine stand and never mounted on a vehicle... I paid $475. and a 3 hr round trip...

Hey buddy I went ahead joined here so if you want, I can leave feedback here after I receive the headers and that should help us both out.. Thanks

Hey Y'all, some may know me by facebook as "Chuck Beeson" I'm working on a 65 Dart 2dr sedan 170 3 on tree, doing a V8 swap...73 4dr Valiant donor lots of good unrusted parts to sell.... I have a couple 318LA's 79 and 90 roller both with flat tops with 455 Comp cam, 714 heads I'm...