Recent content by Houseoffubar

  1. Houseoffubar

    Hey, thanks so much!

    Hey, thanks so much!
  2. Houseoffubar

    1972 Dodge Colt

    There is very very little difference using a crossover pipe in the exhaust of a motorcycle. This is mainly helpful in cutting down the decibels, not for torque
  3. Houseoffubar

    Great service!

    Thanks for the advice! I always use USPS, but it was not listed as an option, but there was the option of free one day shipping, so foolishly I chose that. I will always ask from now in
  4. Houseoffubar

    Great service!

    I’ll be posting in my build thread in Forced induction. Just collecting parts now, but starting fab work this week
  5. Houseoffubar

    Great service!

    Hey guys, I’m never one to kiss corporate butt......but, I just ordered all my pieces to convert my D-150 to carburetor and turbo it. Distributor, fuel pump, pressure Reg. Gaskets etc. Well according to the tracking the shipment was delivered to the wrong place. I don’t have many neighbors, so I...
  6. Houseoffubar

    Any fabo members up in Seattle or near by ?

    Puyallup and I have a D-150 truck, and A-108 van, but Mopar
  7. Houseoffubar

    Lets see those SUPERCHARGER A-Bodies

    Yeah, I don’t get the 300hp at all!? You should EASILY BE PUSHING 4-450hp and a solid 600 with a with 7 psi
  8. Houseoffubar

    CRANK WOBBLE!! Updated, found problem

    Gotta admit, I am lost as to what is desirable
  9. Houseoffubar

    Project D-$150

    I do have an 8.8 limited slip with 3.73 hears. I may wind up fitting that to the truck for a little better launch.
  10. Houseoffubar

    Project D-$150

    I read your thread through twice. Sounded like a pain at times, but a whole lot of fun! I appreciate any advice you have to offer!
  11. Houseoffubar

    Project D-$150

    I remover the rear bumper, that should help, right? Lol This is my daily driver, so the interior is nice to have. I am rear mounting the battery, and replacing the front bumper with a light weight option. The truck sits currently at 3,800lbs I can ditch a little weight, but there is not a lot of...
  12. Houseoffubar

    Project D-$150

    HOW DARE YOU SIR!!! hahaha
  13. Houseoffubar

    Project D-$150

    Sorry, Baseline? You mean, dyno or 1/4 mile time stock? I have not done anything, but it is pretty slow. I will try to mark off a 1/4 mile by my house. We live right next to Levee Rd. And it is a perfect dragstrip. These Are supposedly about 170hp. I am shooting for 4-450hp
  14. Houseoffubar

    Project D-$150

    I started a thread in the restorations thread, then realized I am not actually restoring anything, and being a truck, I should put it here and focus on the motor being a turbocharged 318. My goal is a random self imposed Parameter of building a 12 second truck for the absolute lowest cost...
  15. Houseoffubar

    318 EFI and carb

    Well, you can buy a used Holley for $50. $35 later you have a rebuild kit, and they work quite well. The FI stuff is nice, but for a possible 10% increase in mileage, $1,000 is a lot to spend. If I did have the money just laying around, I would probably go FI on a daily driver.
Back
Top