Recent content by JeremyAB95

WIPER MOTOR SOLD

Steering collar sold

WATER PUMP PULLEY SOLD Brake pedal, wiper motor, throttle pedal pad, dome light lens, coil bracket, upper control arm eccentric bolts, and torsion bar adjusters still available!

Was unable to locate a number on the pulley. Measurement of overall height is 3-1/64" and diameter looks to be around 6-7/8"

STRUT BARS SOLD

COLUMN SHIFTER AND CRANK PULLEY SOLD

Apologies about that, go ahead and try again. I believe it's cleared out now.

Is this the spring you were looking for? It was in the box with the rest of the steering column stuff. Not 100% if it's what you need.

Starting to clean out the garage, and I have some parts from a 1970 Duster that I don't need. Near Columbus, OH. Payment accepted in PayPal or Google Pay only at this time, unless locally picking up. PLEASE NOTE PRICES BELOW DO NOT INCLUDE SHIPPING Automatic brake pedal - $40 OBO Wiper motor...

Gonna sound silly but just wondering if anyone has any good pics of how the window regulators go together in the door on a 70 Duster. I should have taken some prior to disassembling this thing. Live and learn I guess!

Thanks everyone for the helpful replies. Almost certain it was the china walls, found oil in the corners when I tore into the engine today and got the intake off. Used damn near a whole can of brake cleaner degreasing everything. I switched from the gray gasket maker to the ultra black RTV, and...

Would you recommend any light sanding? I saw some other threads recommending making a little crosshatch pattern on the China wall with 220 grit.

I am thinking it may be the China walls. I tried the dye out to help me find the leak and it seems like there's a small one in the front corner where the pax side head meets the intake, and then the back seems to be leaking all along where the intake seals against the china wall. I thought I was...

I did a little research and started digging through other threads and I am wondering if this is what's causing my leak on the front of the engine. It seems wet near the corner of the head where the intake manifold gasket is supposed to meet up with the RTV gasket goop, at least I think it does...

Crap! Sorry, brain fart. Meant the oil pressure sending unit at the back near the distributor. I have one of those Mopar chrome push-in breathers on one valve cover and a PCV on the other. Oil pressure sending unit is an intellitronix one for their electronic gages so I don't know if that's just...