Recent content by maca

  1. M

    Boosting magnum exhaust manifold question.

    Hey guys I've boosted a few Mopar engines but made log manifolds. I've seen a few guys reverse the factory manifolds around so they face forward. Can anyone tell me how they successfully joined the pipe to the factory manifolds without leaks. Welding a V-band to cast iron always runs the risk of...
  2. M

    Ebay GT45 + 5.9 Magnum + E85 blow thru

    I wish we could find magnum 360s in Australia but they are very rare as they were never released here. I shipped mine from the US. I gapped my rings at .028 top and.030 second ring. Had no issues and no blowby until I cracked the piston. Wish I had a few more short blocks here.
  3. M

    Ebay GT45 + 5.9 Magnum + E85 blow thru

    I asked on this forum a while ago what were the limits of the Magnum stock pistons. Hahaha last year I found out. I was surprised how long they lasted. I ran 650 HP at the wheels for a long time. However I eventually cracked a piston. It lasted longer than I thought. It's now forged
  4. M

    What factory Spark plugs for a 360 Magnum question.

    Thanks for your reply mate This one's not for my turbo car. It's basically stock with a cam. The turbo ones I use a cooler recessed plug
  5. M

    What factory Spark plugs for a 360 Magnum question.

    Hey guys The 360 Magnum engines were never released in Australia so we have no listings over here for them. I Googled but found different heat ranges of 4 and 6. Can somebody please tell me what the factory spark plug recommendation is for a 360 Magnum 1994 model. I don't know what vehicle it's...
  6. M

    Can I use a Magnum pan gasket on a Magnum engine with a LA pan.

    Thanks heaps for the pics. They have helped alot. Is the rear part of the gasket similar size to each other. No modifications needed down the back?
  7. M

    Can I use a Magnum pan gasket on a Magnum engine with a LA pan.

    Thanks do you know where I can find this thread in what form
  8. M

    Can I use a Magnum pan gasket on a Magnum engine with a LA pan.

    Hey guys I had a Magnum Pan gasket a long time ago and I seem to remember the rear end is a lot narrower than the LA rear gasket. Can I use the Magnum pan gasket with an LA sump. if anyone has a Magnum pan gasket available can they please tell me the thickness of the rear section on the Magnum...
  9. M

    Can I run 360 la extractors on a 360 Magnum

    Hahaha yep you guessed it. Aussie lol I've got it all sorted now thanks everyone for your help
  10. M

    What is the shallowest cast 727 transmission pan I can get.

    Hey guys my flimsy factory transmission pan on my 727 always leaks. ID like a more rigid one like the cast alloy ones as they are much better. But the car is very low and I can't use those deep Pan ones. What is the shallowest rigid transmission pan I can get. Cheers
  11. M

    Can I run 360 la extractors on a 360 Magnum

    Thanks for the post. It's exactly what I'm doing right now. Didn't think of it yesterday but thought of it this morning. Thanks heaps
  12. M

    Can I run 360 la extractors on a 360 Magnum

    Yeah the bolt pattern is the same but the ports are a different shaped. The la360 ports are much longer top to bottom. they go so low that where the bottom of the manifold port sits against the head for there's only 1mm contact. The Magnum heads are the same as the 318 ports I'll try and post a...
  13. M

    Can I run 360 la extractors on a 360 Magnum

    Hey guys I've got 360 pacemakers to suit in LA engine. I want to run them on my 360 Magnum that's running enginequest heads. I've checked out the difference in the ports and the LA extractors are much deeper and nearly come off the bottom of the Magnum head. They only touched by 1 to 2mm at the...
Back
Top