Recent content by mattq

  1. M

    investing your money ;)

    I'm just getting into it now. I figure I can put a little in every paycheck and see how it goes. Looking to the future I have a 401k for retirement but looking to add as much as I can to be comfortable.
  2. M

    investing your money ;)

    Bring this one back to life. Is anybody here doing any stock trading using a program called robinhood?
  3. M

    TTI vs Dougs

    I recently installed TTI headers (1 7/8" primaries ceramic coated polished with the thermal barrier) on my 360 in a 71 dart. The underhood temperature is noticeably lower and more aggressive performance. My main sell on these were the bigger size and ground clearance since the old headers were...
  4. M

    17th Annual Mopars Invade @ MoKan Dragway

    Mo-Kan Dragway
  5. M

    17th Annual Mopars Invade @ MoKan Dragway

    see you there good event old school race track
  6. M

    pitman arm to center link question?

    thanks guys
  7. M

    pitman arm to center link question?

    hum can't seem to find just those parts have to buy the whole arm to get those. Already checked with the local stores.
  8. M

    pitman arm to center link question?

    I'm guessing this is it.
  9. M

    pitman arm to center link question?

    Is there a rubber bushing between the pitman arm and the center link? I'm putting my suspension together after a header install and there seems to be a large gap between the two when I tighten the castle nut down. And where can I get new grease boots for this? thanks ps can anyone post a pic...
  10. M

    TTI headers which ones to use?

    Put the new ones in today passenger side was a breeze. Drivers side that is another story. Looks like slip tube is hitting the steering column ring for the shifter may just grind down the ring since I have a floor shifter now. I have to say these things fit awesome.
  11. M

    TTI headers which ones to use?

    yep going in from the bottom had to pull torsion bars working on separating the drag link now. new motor mounts this weekend I talked to the guys at hughs engine and told them my plans and he said go big 1 7/8" primaries
  12. M

    TTI headers which ones to use?

    Out with the old in with the new TTI big tube headers polished ceramic coated
  13. M

    TTI headers which ones to use?

    Ok guys I'm getting ready to pull the trigger on ordering tti headers. I'm tired of low hanging crappy headers the hedmen ones I have are toast and I'm not going down that road again. The car is 71 dart with a 360 j-heads that have been max hogged out and 2.02 intake valves in them. Power...
  14. M

    Leaking PS gear box at top-need help

    good info in this thread I love this place! i used #67 13/16" OD by 11/16" ID 1/16" thick and #6 7/16" OD by 5/16" ID 1/16" thick x2
  15. M

    [WANTED] 1971 dart gas cap chrome

    I'm going to do some local searches and I will let you know thanks.
See more
Back
Top