Miszny's latest activity
-
Miszny replied to the thread Small block + 4 speed build.Small update: The block required a lot of work. Previous machine shop screwed up, one hole was sleeved and it ovalized hole next to it... -
Miszny replied to the thread Small block + 4 speed build.I’m not worried about weight, I’m using 7/16 .120 wall pushrods in my own engine. Heavy pushrod is a good thing. I don’t have pushrods...
-
Miszny replied to the thread Small block + 4 speed build.With hydraulic roller cam and lifters?
-
Miszny replied to the thread Small block + 4 speed build.Block is now bare and at machine shop. It was machined before tear down and assembled. It sat with iron heads torqued down for a few...
-
Miszny replied to the thread Small block + 4 speed build.Pistons are .01” down the hole. I was targeting .045” piston to head distance so will take off .005”. Block was machined before...
-
-
Shutting the car off at speed isn't necessarily great, either. Do you have needle bearings throughout? With the engine shut off the...
-
I've been talking with miszny on some parts to achieve some better longevity with his 727, and we'll get there at some point if some...
-
Miszny replied to the thread 1000hp 727 full manual build.For sure less rotating weight is a good thing. I will get it when I order billet input shaft and hub. This should be last step for me...
-
Miszny replied to the thread 1000hp 727 full manual build.It also looks cool ;-) ;-)
-
Miszny replied to the thread 1000hp 727 full manual build.I am doing all the stuff because my son is very often in the passengers seat. Want to minimize risk mostly because of him
-
Miszny replied to the thread 1000hp 727 full manual build.Experience exchange is the best you can get. There are many fairy tales in what we do.
-
You still need the shield or blanket because it’s in the rule book that if you don’t have an SFI case you need to run one. Anything can...
-
Miszny replied to the thread 1000hp 727 full manual build.So aftermarket front drum can still explode? I was reading somewhere that factory drum explodes arouns 13000rpm and A&A billet steel...
-
This is some stuff I put into my tranny. The front drum is aluminum with a steel sleeve on it. The light weight weight parts saved 6 1/2...
-
Miszny replied to the thread 1000hp 727 full manual build.So how is longevity of aluminium drums? Do they get wear marks from steels inside? Whats your experience?
