Mopar69gts's latest activity
-
Mopar69gts replied to the thread [SOLD] Holley 950 HP DoublePumper CARBURETOR.Pm sent -
Sunday Feb 18th 2024
-
Adding headers will make a difference, a noticeable difference
-
SOLVED! My MSD blaster 2 Coil was weak Once I swapped it ,instantly stopped missing, and I was able to get the timing back down where...
-
Mopar69gts replied to the thread Aftermarket valve covers and intakes?.I used felpro 1646 thick cork with a steel shim gaskets 5/16" thick. Mopar Performance cast aluminum valve covers and a edelbrock air...
-
Mopar69gts reacted to GTX JOHN's post in the thread Jon wins at LVMS warming up for Next Week Muscle Cars at Strip. with .I was out of the country, but my boy took his 68 small block street Valiant out to practice for next week at LVMS Saturday. He won Pro...
-
If I had a lot of spare time I may weld it up for practice. Regardless of how it turned out I would scrap it when I was done. I would...
-
If that was just a crack and a manifold worth fixing and you were capable of drilling the end of every crack it’s doable. But that thing...
-
Whatever you paid for it was too much. Look for something else.
-
Junk. You will be chasing issues with that one forever.
-
I would scrap it
-
Mopar69gts replied to the thread Pop pop on exhaust side.If it hasn't been mentioned, Might want to check the power valve. If it's blown or has a high vacuum number like 10.5" As far as I know...
-
Mopar69gts replied to the thread Pop pop on exhaust side.I think that his gauge is showing about 9 in of vacuum. The outside numbers are cm vacuum.
-
Mopar69gts reacted to Newbomb Turk's post in the thread Cylinder head discussion 340 with stock above deck pistons with .Stuff coming off my dyno runs at 13.1 to 13.4 AFR. Not all O2 sensors read the same. Tune for MPH and read your plugs very close. Once...
-
No box to the lanes If you haven’t been to a Norwalk Mopar race it sure be on your to do list.
